timer
(Security-Suite ESS)
Default Configuration
VLAN #1
Command Mode
Security-Suite ESS Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the policy VLAN for a security-suite to
VLAN ID 5.
Console (Config-wlan-ess)# security suite configure wpa
Console (Config-ess-security)# vlan 5
The timer Security-Suite ESS Configuration mode command configures
the key exchange timers for a Security-Suite. To restore the default
configuration, use the no form of this command.
Syntax
timer rekey-time-unicast {never | minutes}
no timer rekey-time-unicast
timer rekey-time-multicast {never | minutes}
no timer rekey-time-multicast
timer reauth-time {never | seconds}
no timer reauth-time
timer idle-time {never | seconds}
no timer idle-time
Parameters
rekey-time-unicast minutes — Unicast rekeying timeout period.
■
(Range: 1-4294967295)
rekey-time-multicast minutes — Multicast rekeying timeout period.
■
(Range: 1-4294967295)
timer (Security-Suite ESS)
341
Need help?
Do you have a question about the 3CRUS2475 and is the answer not in the manual?
Questions and answers