Fitting Replacing Spool Line - Hyundai power products HYBC5200X User Manual

2.13. FITTING / REPLACING SPOOL LINE
STEP 1 : Rotate the blue centre piece to align
the arrow mark with the holes.
STEP 3 : Pass the nylon rope through the
two holes until you have 2m each side.
STEP 5 : Turn the blue centre piece clockwise
until there is 20cm of line remaining.
STEP 2 : Check the two holes are aligned.
STEP 4 : Use 4m or 2.4mm nylon trimmer line.
Page 188