Vivitar VBPARTY User Manual

Vivitar® VBPARTY
Bluetooth® Speaker User Manual
Thank you for purchasing the Vivitar® VBPARTY Bluetooth® Speaker.
Introduction
With this speaker, you will enjoy listening to high quality music wirelessly using Bluetooth®
technology. It also pairs with other Bluetooth-enabled devices (Bluetooth V4.2+EDR specification and
A2DP and AVRCP profiles).
Specifications
• Bluetooth Specification: V3.0+EDR
• Operation Frequency: 2.402-2.48GHz
• Supported Profile: A2DP, AVRCP
• Operation Range: Up to 33 feet(10 meters)
• Play Time: About 2 hours
• Standby Time: About 20 hours
• Battery Type: 400mAh, 3.7V, Polymer Lithium Ion Battery
• Charge Time: About 2 Hours
In the Box
• VBPARTY Bluetooth® Speaker
• USB Charging Cable
• User Manual
Safety Precautions
• Please read this User Manual carefully and follow all instructions.
• To avoid damage or malfunction of the speaker do not drop it from high locations and/or on to
hard surfaces, do not place heavy objects on it.
• Keep speaker away from humidity, water and other liquids. If it does get wet, do not operate as this
may cause an electrical shock, explosion and damage to the device or to the user.
• Do not place or keep this product near heat sources, such as direct sunlight, radiators, stoves or
any other apparatus that produces heat. This may cause an explosion, degrade the performance
and/or reduce battery life.
• Do not modify, repair or disassemble device (especially the battery). Doing so will void the
warranty. The battery in this device may present a risk of fire or chemical burns if misused or
tampered with.
• Use only supplied and manufacturer-approved chargers and unplug this device when not in use for
long periods of time or during lightning storms.
FCC Statement
This device complies with the part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
EC Declaration of Conformity
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired
operation.
Note: The manufacturer is not responsible for ANY interference, for example RADIO or TV interference,
caused by unauthorized modifications to this equipment. Such modifications could void the
user's authority to operate the equipment. This product is CE certified according to the provision
of the R&TTE Directive (99/5/EC). This declares that this product is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC. Please note that
this product uses radio frequency bands not harmonized within EU. Within the EU this product is
intended for use in Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland,
Italy, Luxembourg, the Netherlands, Portugal, Spain, Sweden, and United Kingdom and within
EFTA in Iceland, Norway and Switzerland.
Location of Controls
① Charging Port
② Indicator LED
③ Power / Play / Pause
①
④ Disco light on/off
②
First Time Use
Charging the Battery
The VBPARTY Speaker has a built-in, rechargeable lithium-polymer battery. To avoid damage, do not
attempt to remove the battery. The full
performance of the battery is achieved after
two or three charging-discharging cycles.
Charge the battery fully before first use.
1. Connect the USB cable to the speaker.
2. Connect to the correct outlet (wall,
computer, car charger).
3. When the charger is connected to the
speaker, the red indicator light will turn on.
Note: Charging the battery fully may take up
to 2 hours.
4. When the battery is fully charged, the red indicator light will turn off. Disconnect the charger from
the speaker and the outlet. The speaker is ready for use.
Note: Overcharging could reduce the life of the battery. A charged battery will lose its capacity if it is
not used on a regular basis.
Important!
Ensure that the battery is fully charged if the speaker is not used for a long period of time. To avoid a
complete discharge of the battery, charge the speaker at least every six(6) months.
③
④