Hazard Warning Lights - Cupra Formentor Owner's Manual

In the vehicle settings menu of the infotain-
ment system you can adjust the duration of
the light switch-off delay, and activate and
deactivate the function.
Activating the "Coming Home" function
For vehicles with light and rain sensors.
Turn off the vehicle and turn off the igni-
●
tion with the lights in

The automatic "Coming Home" function is
●
only active when the light sensor detects
darkness.
For vehicles without light and rain sensors.
Switch the ignition off.
●
Activate the headlight flashers for approxi-
●
mately 1 second.
When the driver door is opened, the "Com-
ing Home" lighting comes on. The headlight
turning off time counts from when the last
door or rear lid are closed.
The "Coming Home" lighting turns off in
the following cases:
Automatically, once the headlight turning
●
off time has elapsed.
Automatically, when a vehicle door or the
●
rear lid is still open 30 seconds after starting
the engine.
If the light panel lamps are off
●
With the ignition is switched on.
●
118
Activating the "Leaving Home" function
Unlock the vehicle using the remote con-
●
trol.
The "Leaving Home" function is only acti-
●
vated when the lights are in
the light sensor detects darkness.
The "Leaving Home" lighting switches off
››› in the following cases:
page 113
mode.
Automatically, when the "Leaving Home"
●
switch-on time ends (default 30 sec).
When the vehicle is locked using the re-
●
mote control.
If the light panel lamps are off
●
With the ignition is switched on.
●
Note
To activate the "Coming Home" and "Leav-
ing Home" functions, the
main switch of the lights should be on and
the light sensor should detect darkness.
››› page 113
.
Operation
mode and

›››
page 113
.
lamp on the


Hazard warning lights

Fig. 91 Dash panel: hazard warning lights switch
The hazard warning lights are used to draw
the attention of other road users to your ve-
hicle in emergencies.
If your vehicle is stationary:
1. Park the vehicle at a safe distance from
road traffic.
2. Press the button to switch on the hazard
›››
warning lights .
3. Stop the engine.
4. Apply the electronic parking brake.
5. Engage 1st gear in vehicles with a manual
gearbox, or press the parking lock button
P in vehicles with automatic transmission.
6. Use the warning triangle to indicate the
position of your vehicle so that it does not
pose a hazard to other road users.