Ending The Test Function - EDWARDS SYSTEMS TECHNOLOGY EST2 Operation Manual

EST2 System Operations Manual
Figure 2-23 illustrates the 2-LCD display during the test mode.
13:18:12 M002
Open Fault 0030
System in Test Mode
Figure 2-23: Typical test mode screen

Ending the test function

The Test function ends through operator input or automatic
system response and resets the fire alarm control panel.
To end the Test function manually:
1. At the 2-LCD, press Test.
2. Press Delete.
The test function will automatically end if you let 30 minutes
pass without testing a device. The 2-LCD provides a reminder of
the 30-minute test window, as seen in Figure 2-22.
See the site-specific information, provided with the panel, for
customized test functions.
Operating panel devices
@13:27
STDOP034.CDR
2.39