Troubleshooting - Breville Milk Cafe BMF600 Instruction Booklet

TROUBLESHOOTING

PAGE HEADER.....
PROBLEM
Milk is not
foaming?
Milk is
not heating?
Frothing disc is
not moving or
is dislodged?
Ingredients are
not melting?
Milk is too cold/
too hot?
Emergency stop
14
POSSIBLE CAUSE
• Milk is warm or too hot
to foam.
• Frothing disc is not
inserted correctly.
• Frothing disc has
dislodged during
operation.
• Ingredients have been
added too quickly.
• Ingredients have been
added before milk has
warmed up.
• Ingredients are too large.
WHAT TO DO
• Use cold, fresh milk.
• Do not re-foam already
heated milk.
• Try reducing milk volume
in jug.
• Ensure light is illuminated
and not flashing.
• Try a different milk. Some
milks produce more froth
than others. Experiment with
different milk options and
frothing discs to achieve the
desired result.
• Adding dense ingredients like
thick syrups, heavy powders
and large flakes can reduce
the amount of foam. This is
normal.
• Ensure jug is correctly
positioned onto the power
base.
• Press START/STOP button to
commence cycle.
• Increase temperature by
turning the START | STOP dial
to the right.
• Stop operation.
• Remove liquid from jug.
• Insert disc firmly into jug.
• Refill jug with liquid.
• Add ingredients (if desired)
slowly and in small quantities.
• Allow the milk frother to stir
for a few seconds before
adding ingredients.
• Ensure ingredients are in
small pieces.
• Adjust temperature dial to suit
personal preference.
• Always operate unit between
MIN and MAX level markings
inside jug.
• To stop operation at any time,
press the START | STOP
button. Operation has stopped
once the button surround has
stopped flashing.