Wiring Connection - Kenwood KDC-4551UB Instruction Manual

Wiring connection

For KDC-4051UG/ KDC-4051UR/ KDC-415UA/ KDC-415UR/ KDC-4251URY/ KDC-4551UB/
KDC-455UW/ KDC-4651URY
KDC-4051UG/ KDC-4051UR/ KDC-415UA/
KDC-415UR/ KDC-4551UB/ KDC-455UW
Rear/subwoofer output terminals
Light blue/yellow
(Steering remote control wire)
Blue/White
(Power control/motor antenna
control wire)
Brown
(Mute control wire)
Yellow (Battery wire)
Red (Ignition wire)
Red (A7)
Yellow (A4)
ISO connectors
Pin Color and function
A4 Yellow Battery
A5 Blue/White Power control
A7 Red Ignition (ACC)
A8 Black Earth (ground) connection
18
KDC-4251URY/ KDC-4651URY
Antenna terminal (JASO)
KDC-4051UG/ KDC-4051UR/ KDC-415UA/ KDC-415UR/
KDC-4551UB/ KDC-455UW/ KDC-4651URY: To the
steering wheel remote control adapter (optional accessory)
To the power control terminal when using the optional power
amplifier, or to the antenna control terminal in the vehicle.
To the terminal that is grounded when either the telephone rings
or during conversation. (To connect the Kenwood navigation
system, consult your navigation manual.)
Connecting the ISO connectors on some VW/Audi or
Opel (Vauxhall) automobiles
You may need to modify the wiring of the supplied
wiring harness as illustrated below.
Ignition wire
Unit
Pin
B1 / B2 Purple
B3 / B4 Gray
B5 / B6 White
B7 / B8 Green
Front output terminals
Rear/subwoofer output
terminals
(Red)
Battery wire
(Yellow)
Default wiring
Color and function
ª ·
/ Purple/black
ª ·
/ Gray/black
ª ·
/ White/black
ª / Green/black ·
Fuse (10 A)
A7 (Red)
Vehicle
A4 (Yellow)
Rear speaker (right)
Front speaker (right)
Front speaker (left)
Rear speaker (left)