Skope Carel Ir33 Controller; Overview - Skope VF Series Service Manual

SKOPE VF Series
2

SKOPE CAREL ir33 Controller

Figure 1: SKOPE Carel
ir33 electronic controller
10

Overview

The SKOPE electronic controller controls and displays the cabinet
temperature. The preset temperature setting controls internal air
temperature between -21°C and -18°C in integral freezers, and between
-12°C and -9°C in ice storage cabinets.
The electronic controller also signals temperature alarms, recording the
minimum and maximum value reached at the time of the alarm.
To ensure efficient operation, the electronic controller has a built in minimum
off cycle time of 5 minutes and features regular temperature terminated
defrost cycles. During the defrost cycle the compressor and evaporator fan
switch off.
The SKOPE electronic controller is a unique SKOPE customised Carel ir33
controller. This custom controller cannot be interchanged with a standard
Carel ir33 controller.
Description
SKOPE Carel ir33
Electronic Controller
VF Series electronic controllers are pre-loaded with three different
parameter sets (BN1, BN2 and BN3) for use with VF Series cabinet
variations. Refer to "Parameters" on page 20 for more information.
Manufacturer part No.
IRSKC0HF325
SKOPE CAREL ir33 Controller
SKOPE part No.
ELZ3333AP-485
Service Manual