Table of Contents
Advertisement
In Standby mode
Built-in Amp Setting
Controlling the built-in amplifier.
Turning OFF this control enhances the preout
quality.
Display
Setting
"AMP : ON"
The built-in amplifier activates.
"AMP : OFF"
The built-in amplifier deactivates.
Other than Standby mode/
When the Dual Zone System is ON
Dual Zone System Setting
Setting the Front channel and Rear channel sound
in the Dual Zone System.
Display
Setting
"Zone 2 : Rear"
Sub source (Auxiliary input source) is to be rear
channel.
"Zone 2 : Front"
Sub source (Auxiliary input source) is to be front
channel.
Other than Standby mode
B.M.S. (Bass Management System)
Adjust the bass boost level of the external amplifier
using the main unit.
Display
Setting
"AMP Bass : Flat"
Bass boost level is flat.
"AMP Bass : +6"
Bass boost level is low (+6dB).
"AMP Bass : +12"
Bass boost level is mid (+12dB).
"AMP Bass : +18"
Bass boost level is high (+18dB).
⁄
• Refer to the catalog or instruction manual for power
amplifiers that can be controlled from this unit.
• For amplifiers, there are the models you can set from Flat
to +18 dB, and the models you can set from Flat to +12
dB.
When an amplifier that can only be set to +12 is
connected to the unit, "AMP Bass : +18" will not work
correctly even if it is selected.
Other than Standby mode
B.M.S. Frequency Offset
Setting the central frequency, boosted by B.M.S.
Display
Setting
"AMP FREQ : Normal"
Boost with the normal central frequency.
"AMP FREQ : Low"
Drop the normal central frequency 20%.
When LX AMP unit connecting
AMP Control
You can control the LX AMP connected to the unit.
1
Select AMP Control mode
Turn the Control knob.
Select the "AMP Control" display.
2
Enter AMP Control mode
Press the Control knob for at least 1 second.
3
Select the AMP Control item for adjustment
Push the Control knob towards up or down.
⁄
• For the details on the AMP Control item, see the
Instruction manual attached to the LX AMP.
4
Adjust the AMP Control item
Push the Control knob towards right or left.
5
Exit AMP Control mode
Press the [FNC] button.
⁄
• You cannot use the LX AMP operation during standby
mode.
|
41
English
Advertisement
Table of Contents
