Advertisement
Operating Instructions - Dishwasher Bosch SPV40C10GB
Control Panel
1. ON/OFF switch
2. Timer programming*
3. Additional options**
4. Programme**
5. Button <
Switching on the appliance
1. Switch the ON/OFF switch
2. Press the programme selector to the required programme. The expected programme duration flashes on the
digital display.
3. Press START button. The programme starts running.
End of programme
The programme has ended when the value 0:00 is indicated on the numerical display. The programme has ended
when neither of the two displays [8] or [7] is lit. The end of the programme is also indicated by an acoustic signal.
At the end of the programme please open the door fully and not partially when emptying the dishwasher. Remove
the utensils when they have cooled down.
6. Button >
7. Cleaning display
8. Dry display
9. START button
10. Rinse aid refill indicator
11. Salt refill indicator
12. Display "Check water supply"
*Depending on model
**Number depending on model
Advertisement
Table of Contents
Related Manuals for Bosch SPV40C10GB
Summary of Contents for Bosch SPV40C10GB
- Page 1 Operating Instructions - Dishwasher Bosch SPV40C10GB Control Panel 1. ON/OFF switch 6. Button > 11. Salt refill indicator 2. Timer programming* 7. Cleaning display 12. Display “Check water supply” 3. Additional options** 8. Dry display *Depending on model 4. Programme** 9.
- Page 2 Interrupting the programme • Switch off ON/OFF switch, the LEDs go out. The programme is saved. • If the door was opened on an appliance which has a warm water connection or is heated, first leave the door ajar for several minutes and then close. Otherwise, expansion (pressure) may cause the appliance door to spring open or water to run out of the appliance.
Need help?
Do you have a question about the SPV40C10GB and is the answer not in the manual?
Questions and answers