Erasing A Part Of A Track - Kenwood DM-SE7 Instruction Manual

The TRACK DIVIDE function can be used to turn the part you want to erase into a track, and that track can
be erased with the TRACK ERASE function.
Be careful in using this operation because a track cannot be recovered once it has been erased.

Erasing a part of a track

1
Turn the part to be erased into one track.
Use the TRACK DIVIDE function and edit
the track so that only the part you want
to erase becomes a track.
2
Erase the part to be erased.
Use the TRACK ERASE function to erase
the "track" (part you want to erase) that
you made in step 1.
3
Eject the Mini Disc. (Main unit only)
TRACK DIVIDE
Should be approx.
2 sec. or longer.
Should be approx. 2
sec. or longer.
1 2
A B
1 2
A B
The part divided with TRACK DIVIDE becomes
one "track".
fl
w
0
fl
Part to be erased
3
C
Execute TRACK
DIVIDE twice.
3 4 5
C
WRITING EJECT
Information is Mini Disc has been
being written. ejected.
While "WRITING" is displayed, do not im-
pact or move the unit because information
Note Note
about recording and editing is being writ-
ten to the Mini Disc.
TRACK ERASE
Part to be erased
1 2
A B
Execute TRACK
ERASE once.
1 2
A B
The space left after erasing is filled by
subsequent tracks which move along.
Editing
DM-SE7(En)
D I S C
N O
w
3 4 5
C
Track No. is
adjusted.
3 4
C
43