Step 9
Route the antenna lead down the A pillar into the dashboard to the Kenwood head‐unit. Ensure not to trap any leads
and cable tie as you go.
Carefully refit the A pillar cover and check for the DAB reception.
4
Step 6
Remove the 2 white sticky pad backings from the amplifier
block on the antenna lead. Ensuring that you do not touch the
terminals or the sticky surface.
Step 7
Match the contact tabs of the amplifier block on the antenna
lead with the two black triangles on the antenna film and stick
the two parts together.
Note: Do not touch the feeder terminal of the antenna film.
Step 8
Remove the yellow backing from the earth tab on the amplifier
block and stick this to the metal of the A pillar.
Note: You DO NOT need to remove any paint for the earth
contact to work