Advertisement
4. OPERATING INSTRUCTIONS
4.1.
OPERATION.
WARNING! Before using the winch ensure you read, understand and apply Section 1 safety instructions.
Note! Re-lubricate all shafts and gears before use.
4.1.1. fit crank Handle assembly by inserting the hexagon socket of the crank Handle onto the end of the Main Drive Axle. screw on tightly
using the enclosed hex screws and hex key.
4.1.2. to pull a load, turn the crank Handle clockwise.
4.1.3. the load can be stopped in any position, by letting go of the handle.
4.1.4. to release the cable/strap, turn the crank Handle anticlockwise. the Automatic Brake will prevent the Handle from kicking back.
WARNING! the brake function will only be activated by a minimum load of 25kg. Do not oil or grease the brake mechanism.
4.1.5. to activate the free spool function, take off the crank Handle, and turn the hex nut anticlockwise. the drum can now be turned freely.
WARNING! With a load on the cable or strap, you can not use the free spool function.
4.1.6. to stop using the free spool function turn the hex nut clockwise back to the Auto Brake position.
Caution! Never fully extend the cable or strap when under load.
Caution! Load capacity is reduced as layers build up on the drum.
5. MAINTENANCE
5.1.
Keep winch, cable and strap clean. Inspect cable and strap regularly checking for fraying, kinks, broken strands or distortion and
replace if necessary. Keep the cable and unit lightly oiled for protection. Although the winch has been fully lubricated
during manufacture, periodically grease gears, reel shaft and handle threads, but DO NOT get oil or grease on the brake mechanism.
Parts support is available for this product. to obtain a parts listing and/or diagram, please log on to: www.sealey.co.uk,
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: no liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
© Jack sealey Ltd
Fig.3
email: sales@sealey.co.uk or phone: 01284 757500
Environmental Protection.
recycle unwanted materials instead of disposing of them as
waste. All tools, accessories and packaging should be sorted,
taken to a recycle centre and disposed of in a manner which
is compatible with the environment.
Sole UK Distributor, Sealey Group,
Kempson Way, suffolk Business Park,
Bury st. Edmunds, suffolk,
IP32 7Ar
GWc1200B,GWE1200B,GWW1200B,GWc2000B,GWE2000B,GWW2000B Issue: 1 - 13/03/13
Original Language Version
Fig.4
01284 757500
01284 703534
www.sealey.co.uk
W e b
sales@sealey.co.uk
email
GWE1200.V2
Issue: 2 - 28/01/10
Advertisement
