Software (Pathscape) Configuration; Network Setup - Pathway connectivity solutions Pathport OCTO 64 Series User Manual

SOFTWARE (PATHSCAPE) CONFIGURATION

Wherever possible, we recommend using a PC with Pathscape to configure your OCTO. For in-depth information on using
Pathscape, see the Pathscape manual. Pathscape is available for macOS and Windows from the Software section of our
website: https://www.pathwayconnect.com/index.php/products/software/176-pathscape. Use the QR Code below to visit
the download page.
If using a PC with Pathscape is not possible or practical, see the section Front Panel UI and Menu later in this manual.
NOTE some features are not available if using only the Front Panel to configure the device.

NETWORK SETUP

PLEASE NOTE: Before any configuration and network setup can be done, including setting the IP, the OCTO
must be added to a Security Domain. If the device is not added to a Security Domain, it will not be possible to
configure any properties.
From the factory, the OCTO's IP address is static, and set to 10.X.X.X (where X is between 0 and 254), with a subnet mask
of 255.0.0.0 and a default gateway of 10.0.0.1. Before any additional configuration, set the devices' IP address to the same
subnet and IP range as the computer and other devices on the lighting network.
Additionally, the OCTO's default name in the device list will be shown as its IP address. Give it a useful name before continuing.
January 2021 Pathport® OCTO - 64XX - Manual
30