General Safety Information; Mounting; Tools, Resources And Materials - Helioscreen NEO Installation Manual

1.2 GENERAL SAFETY INFORMATION

The NEO awning has been designed and manufactured in conformity with
DIN EN 13561. However, when the awning is mounted or operated, the persons involved in the respective activity may
be put at a risk if the relevant instructions are not observed.
Only qualified and duly specialized companies or trained specialist personnel may be permitted to mount the awning.
Always observe the information and notes in the Mounting and Operation Instructions.
A failure to observe the relevant information will render the manufacturer's liability null and void.
Modification of the design or configuration of the awning is permitted only after consultation with the manufacturer or
an authorized representative.
The occupational safety and accident prevention regulations specific to each country must be complied with.
In particular, a person performing special work at height must be suitably secured.
The notes on the product and its packaging must be observed.
2. MOU NTING
2.1 TOOLS , RESOURCES AND MATERIALS
•
Drill
• Drill bits, suitable for the drilling substrate and the mounting pieces
• Ratchet with extension and SW 17 and SW 19 sockets
• SW 19 ring spanner
• SW 5 and SW 6 Allen keys
• Slot screwdriver
• Spirit level and string for alignment
• String to align the brackets
• Test cable, resp. adjustment set (for initial operation)
2.2 INSTALLATION PREPARATON
Transport the awning to the site of installation, ensuring that the orientation is correct.
The location of the drive side is indicated on the packaging.
Secure the installation zone (the secured zone must be at least equivalent to the size of the fully deployed awning).
If the awning is hoisted to higher awning positions with ropes, the awning must be removed from the packaging. when
attaching the hoisting ropes, ensure that the awning is properly fastened, but not damaged. Hoist the awning exclusi-
vely in horizontal position and evenly.
Before commencing the installation, please verify whether the type and number of brackets is in conformity with the order and
whether the mounting substrate is the same as that stated on your order.
If significant differences make the safe installation of the awning seem doubtful, please contact the manufacturer of the system and
a mounting/installation specialist.
Failure to comply may result in collapsing of the awning and putting the health of persons at risk!
www.helioscreen.com.au | Phone 1300 766 319 Helioscreen Neo • INSTALLATION GUIDE | 3