Lenovo ThinkReality A6 Quick Start Manual page 5

Identifying buttons and controls
1 2 3
4
6
1. Power Button with LED
Power On/O
Press when the device is o /on. The LED flashes green
when powered on. It turns white when the device is fully
booted, and flashes green as the device shuts down.
Through device control dialog to power o .
Sleep/Wake
5
Click to put the device to sleep or wake it up.
Open Device Control Dialog
6
Press when the device is on.
Hard Boot
Press and hold the power button to hard boot the device.
Factory Reset
Press and hold the power and selection buttons to enter
recovery mode, then choose factory reset.
2. Battery LED Strip
Indicates battery strength. When the battery reaches
20% or lower, the LED blinks.
3. 3.5mm Audio Connector
4. Volume Buttons
5. Selection Button
6. Clip Release Buttons
04