Product Assembly / Assembly Rules / Settings; Before Installation; Installation - Beko ARI 7757186301 Service Manual

5. PRODUCT ASSEMBLY / ASSEMBLY RULES / SETTINGS

5.1. Before Installation

While installing the product, obey the local electric standards
The Product is designed according to commercially available kitchen counters. There should
be a safe distance between kitchen walls and furniture. Look at the picture for appropriate
space (values in mm).
• Product is suitable for use without any support, without any cabinet, with the wall on each
side. 750 mm distance should be left on the built in hob.
• If you put a hood above the device, you should obey the advice of hoods and hood
producer.(Min 65cm)
• Remove the packing materials and shipping locks.
• Surfaces, synthetic laminates and adhesives must be resistant to heat.(minimum 100°C)
• The bench should be flat and must be fixed.
• The space on the bench which the built in hob placed on it should be cut according to
dimension of the installation guide of the hob.

5.2Installation

TR | 8