Table of Contents
Advertisement
• If you do not intend to use the remote control for a long time, remove the batteries. Battery
chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth.
If chemicals touch your skin then wash it immediately.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable (NiCd, NiMH, etc.) batteries.
• Do not continue using the remote if it gets warm or hot.
• Call our Support Center immediately on the support website.
Pairing the Remote Control
• Pair the remote to the TV after you power it on. Keep the remote control within 10 feet from
the TV. Press down the [MENU] button at least 3 seconds to start pairing.
• If the remote paired successfully then a confirmation will display on the screen. If it did not
pair successfully then an 'unsuccessful' message will display. Repeat step 1.
NOTE
• If an unknown error occurred with the remote then it could've been caused by interference.
Try to remove what's causing the interference and pair it again.
• If an unknown error occurred in the remote control while the battery power is normal, you
can take out the batteries and press any key for 1~2 seconds, then the remote control can
work normally.
• The remote cannot be paired to the TV while the TV is in standby mode.
Remote Control
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the ERF2A60 and is the answer not in the manual?
Questions and answers
Use voice control
To use voice control on the Hisense ERF2A60 remote:
1. Make sure the remote is paired with your Hisense TV.
2. Press and hold the microphone (voice) button on the remote.
3. Speak clearly into the remote while holding the button.
4. Release the button when finished speaking.
The TV will process your voice command and respond accordingly.
This answer is automatically generated
@Mr. Anderson