Settings; Gps System - Bryton Rider 860 User Manual

In Settings, you can customize GPS system, Grid settings, General settings, Bike settings,
WLAN, Altitude, Map Display, Navigation. You can also customize most used device settings
via Bryton Active App.

GPS System

Rider 860 has full GNSS (Global Navigation Satellite System) support including GPS,
GLONASS (Russia), BDS (China), QZSS (Japan) and Galileo (EU). You can select a suitable
GPS Mode according to your location to enhance accuracy or better suit your needs.
GPS SYSTEM
Status
GPS
+
Glonass
GPS
+
Gal
+
QZ
GPS SYSTEM
Status

Settings

GPS
+
Beidou
Power
Save
1. Select Settings in home page.
2. Select GPS System.
Enable GPS System
1. Enable GPS System.
2. Select one satellite navigation system to
suit your need.
x GPS+Glonass : GPS + GLONASS
Navigation Satellite System. Glonass is
the second navigational system working
with global coverage and of comparable
precision. Choose this combination if
you're in NON Asia-Pacific region for
best accuracy.
x GPS+Beidou : GPS + BeiDou Navigation
Satellite System. By April 2018, BeiDou
is offering service in the Asia-Pacific
region. Choose this combination if you're
in this region for best accuracy.
x GPS+Gal+QZ : GPS+Galileo+QZSS
Navigation Satellite System. Consume
less power than the two selection above,
with sufficient accuracy for normal use.
x Power Save : Trade-off accuracy to
achieve maximum battery life. Use this
mode in open sky.
Disable GPS System
1. Disable GPS to save power when GPS
signal is not available, or when GPS
information is not required (such as indoor
use).
18 Settings