Preparing For Use - Clarke SHHHAIR 30/9 Operation & Maintenance Instructions Manual

PREPARING FOR USE

Before connecting your compressor to the mains supply, check the following:-
• Firstly, ensure the compressor is on level ground. Do not allow it to run if it
is standing on an incline.
• Check also that the mains
voltage corresponds with that
shown on the data label on the
side of the compressor.
• The ON/OFF switch is in the OFF
position.
FITTING THE INLET FILTER
1. Remove the cap from the top of
the air inlet tube.
2. Push the air inlet filter supplied
securely on to the tube.
7