Chapter 3: Using The Remote Control; Learning About The Remote Control - Toshiba 32HLX95 Owner's Manual

3
Using the remote control

Learning about the remote control

The buttons used for operating the TV are described here. For a complete list of the remote control's
functions, see the remote control functional key chart on pages 27–28.
For a list of the buttons that operate the TV Guide On Screen
turns the TV on and off. Press POWER to turn on the TV. The red LED indicator on the
POWER
TV will be illuminated. Press POWER again to turn off the TV.
accesses the sleep timer (page 77).
SLEEP
The first press of the LIGHT button lights the keypad and turns on the Illumination mode.
LIGHT
With the Illumination mode on, pressing any other key lights the keypad for 5 seconds
(10 seconds if you're in programming mode). Subsequent presses of the LIGHT button toggle
between turning the Illumination mode on and off.
directly tune channels. The "–" button is used to tune digital channels
Channel Numbers (0–9, –/100)
(page 64) or to display the favorite channel list (page 42).
selects the video input source (page 60).
INPUT
cycles through the six remote control device modes: TV, CBL/SAT, VCR/PVR, DVD,
MODE
AUDIO1, and AUDIO2. The TV mode should be chosen to control the TV and Built-in DVD.
Every time you turn the power on, the TV starts from the TV mode. The mode indicator light will
remain lit for a few seconds (page 29).
cycles through the five pictures sizes: Natural, TheaterWide 1/2/3, and Full (page 65).
PIC SIZE
accesses the main TV menu system (pages 33 and 34) or opens a menu in the TV Guide
MENU
™
On Screen system (Chapter 7).
opens the TV Guide On Screen
TV GUIDE
provides detailed information on highlighted items in the TV Guide On Screen
INFO
accesses the home function of the Channel Browser
HOME ( )
selects the picture mode (page 69).
PIC MODE
activates highlighted items in the main menu system and the TV Guide On Screen
ENTER
When a menu is on-screen, these buttons select or adjust programming
Arrow buttons (yzx •)
x / •).
menus. (Also see
While watching TV, these buttons tune to the previous/next channel in the
x / •
channel history (page 62). (Also see "Arrow buttons" above.)
cycles through programmed channels when no menu is on-screen (page 40) and functions as
CH yz
page up/down when a menu is on-screen or when the TV Guide On Screen
(Chapter 7).
adjusts the volume level.
VOL yz
closes on-screen menus and the TV Guide On Screen
EXIT
returns to the last viewed channel (page 64).
CH RTN
selects TV mode to view one program while recording another.
TV/VCR
displays TV setting information on-screen (page 79).
RECALL
reduces or turns off the sound (page 74).
MUTE
initiates the recording process when in the TV Guide On Screen
REC
tunes to the next higher/lower favorite channel (page 42).
FAV CH yz
accesses the freeze feature (page 68).
FREEZE
You can also control the built-in DVD when the MODE button on the remote control
is in TV mode. For DVD operation the following buttons are used: DVD RTN, PBC,
SLOW, SKIP, REW, FF, PAUSE, PLAY, OPEN/CLOSE, STOP, A-B REPEAT, and
SEARCH (see chapter 10).
™
system, see page 47
™
system (Chapter 7).
™
feature (page 63)
™ system.
™
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
™
system (Chapter 7).
™ system.
Note: The error message "Not
Available" will appear if you press a
™ system is open
key for a function that is not available
Remote control effective range
For optimum performance, aim the remote
control directly at the TV and make sure
there is no obstruction between the remote
control and the TV.
Point remote
system.
control toward
remote sensor on
front of TV.
16.4 ft (5m)
25