Advertisement
G
Operating Instructions & Parts Manual for Polypropylene Rotary Drum Pump
IMPORTANT: READ BEFORE USING
1.
Description
Polypropylene Rotary Drum Pump is designed for
transferring organic acids, organic alcohols, detergents,
screen cleaners and other water soluble inorganic
chemicals. For exact media resistance see stability list.
Supply with 2" bung adapter and a 3-piece PP suction
tube to fi t most 15, 30 and 55 gallon drums.
2.
Technical data
Pump Type
Flow
Maximum Fluid Temperature
Bung Adapter
Suction Tube Length
Inlet
Outlet
Wetted Materials of Construction
Maximum Viscosity
3.
General Safety Information
Always carefully read, thoroughly understand and follow the pump operating instructions. Use this
pump correctly and with care for the purpose for which it is intended. Failure to do may cause damage
or personal injury, and will invalidate the warranty. Retain instructions for future reference.
Contact your chemical or fl uid supplier to check for compatibility with pump prior to installation and
operation.
Prior to use, always carefully and thoroughly read and understand the OSHA information contained in the
Safety Data Sheet supplied for the chemical which is to be pumped.
Wear protective clothing (goggles, face masks, long sleeves, long pants, gloves, aprons, etc.) as set forth in
the OSHA Safety Data Sheet when pumping any hazardous chemicals.
When using fl ammable liquids, pump containers should be grounded to avoid static electricity.
Any pump used for transferring fl ammable liquids must be stored in a ventilated area after use.
Pump should be washed out before it is used since processing lubricants may contaminate the fl uids.
Prior to use, inspect your pump thoroughly verifying its proper assembly.
If pump is removed from drum, it should be thoroughly rinsed in a liquid that is compatible with both the
pump and fl uid.
Rotary - Vane
8 oz / Stroke
130°F / 54°C
2" Male
40" Maximum
1-¼" O.D.
1" O.D. Curved Spout
PP, PVDF & Phenolic
2,000 SSU
Advertisement
Table of Contents
Related Manuals for Pressol Polypropylene Rotary Drum Pump
Summary of Contents for Pressol Polypropylene Rotary Drum Pump
- Page 1 Operating Instructions & Parts Manual for Polypropylene Rotary Drum Pump IMPORTANT: READ BEFORE USING Description Polypropylene Rotary Drum Pump is designed for transferring organic acids, organic alcohols, detergents, screen cleaners and other water soluble inorganic chemicals. For exact media resistance see stability list.
- Page 2 Operating Instructions & Parts Manual for Polypropylene Rotary Drum Pump Repair Parts Illustration Repair Parts List Ref No. Qty Description Pump Body Rear Cover Front Cover Rotor Vane Spring Spring Rod Lip Seal Discharge Spout Cap Screw Cap Screw O-Ring...
- Page 3 Operating Instructions & Parts Manual for Polypropylene Rotary Drum Pump Assembly and Installation Check to see if all parts are included. Screw discharge spout (Ref No. 9) into pump body (Ref No. 1) outlet using PTFE sealant tape provided. Do not use pipe sealant.
Need help?
Do you have a question about the Polypropylene Rotary Drum Pump and is the answer not in the manual?
Questions and answers