Shimano Steps Ep8 Operating System; Description Of The Functions; On/Off Button (1); Display Button (2) - Rotwild R.X375 FS Series Manual

Shimano Steps EP8 operating system

The support switch of the Shimano Steps EP8
operating system is on the left of the handlebars
when you are sitting on the bike. The display is on
the right of the handlebars when you are sitting
on the bike.

Description of the functions

The operating system has two buttons and a
support switch. The functions are as follows:

On/off button (1)

Using the on/off button (1)on the drive battery
you can switch the ROTWILD eBike on and off. If
you do not use the ROTWILD eBike for around 10
minutes, the system switches off automatically
to save energy.
Figure 5: On/off button (1)

Display button (2)

By pressing the display button (2) while you are
riding, you can change the ride data shown on the
display.
When the eBike is stationary, pressing the display
button (2) allows you to access the settings menu
and select items from the menu.
Figure 6: Display Taste (2)

Support switch (X/Y)

You use the support switch (X/Y) to select the
level of support you want while you are riding. If
you press the top button (X), you increase the
level of support. To reduce the level of support,
you press the bottom button (Y).
You use the support switch (X/Y) to move the
cursor in the settings menu.
Figure 7: Support switch (X/Y)
15