Setting The Time And Date - Christopher Ward C60 Chronograph Owner's Handbook Manual

How to operate your C60 Chronograph

Setting the time and date

For a superior water resistance your crown is of the screw-down
type. The crown should sit flush to the case (position 1) in order to
6 6
maintain water resistance.
• First unscrew the crown anti-clockwise from the case to position
2 for winding in power. Wind in a clockwise direction to re-power
the watch. Your C60 Chronograph has a maximum power reserve
of 48 hours when fully wound.
• Pull gently into position 3. For rapid date correction, turn in an
anti-clockwise direction.
• Pull gently into position 4 for handsetting and stopping of the
seconds hand. For precise time setting it is recommended to pass
beyond the desired minute and to set the hand backwards.
1. Crown screw-down position
2. Unscrewed position/manual winding
3. Date setting
4. Time setting
2 3 4
1
PLEASE NOTE: Date correction should not be carried out
between 20.00 hr and 02.00 hr as the watch gearing will
already be aligning itself to change the date. The crown
should always be pushed in after adjustment, and it is
best to do so from position 3 to avoid advancing beyond
the desired date.