Sensor Hub (V2.0) And Sensors; Fas; Fbvs-01 "Battery Voltage Sensor; Fgs-0 "Fuel Gauge Sensor - VSpeak for FRSky Manual

8.2 "Sensor Hub (V2.0) and Sensors"

8.2.1 FAS- . . . "Ampere Sensor" (40, 100 ...)
- Announcement voltage in: V
- Announcement current in: A
- Announcement power in: W
- Announcement current consumption in: mAh

8.2.2 FBVS-01 "Battery Voltage Sensor"

- Announcement analog value 1 / 2 in: ....
8.2.3 FGS-0 "Fuel Gauge Sensor"
- announcement tank level in: % tank level

8.2.4 FLVS-01 "Lipo Voltage Sensor"

- Announcement cell number with minimal voltage in: V + alarm
- Announcement cell sum voltage in: V

8.2.5 FVAS-01 "Variometer Sensor"

- Announcement altitude in: m / ft
- Vario sound
8.2.6 GPS-01 "GPS"
- Announcement speed in: kmh / mph

8.2.7 RPMS-01 "RPM Sensor"

- Announcement rotation speed in: rpm
8.2.8 TAS-01 "Triaxial Acceleration Sensor"
- Announcement acceleration X-axis in: g
- Announcement acceleration Y-axis in: g
- Announcement acceleration Z-axis in: g

8.2.9 TEMS-01 "Temperature Sensor"

- Announcement temperature 1 / 2 in: °C / °F

8.3 Sensors for FrSky Telemetry data-port (Tx, Rx, GND)

The following sensors can be connected directly to the FrSky-Telemetrie Port (Tx, Rx, GND)
(... more information is given in the manual of these sensors):
8.3.1 FAS- . . . "Ampere Sensor" (40, 100 ...)
- Announcement voltage in: V
- Announcement current in: A
- Announcement power in: W
- Announcement current consumption in: mAh

8.3.2 Hub-less FrSky "Variometer Sensor"

- Announcement altitude in: m / ft
- Vario sound
FRSky, Version: 1.4
+ alarm
www.VSpeak-modell.de
Page 13/16