Inserting And Removing Hard Drives - Toshiba 9100 User Manual

70
Connecting Other External Devices

Inserting and removing hard drives

Inserting and removing hard drives
Your Tecra
Depending upon the original hard drive installed in your computer,
you may wish to increase storage capacity by changing the
internal drive, or you can also add additional hard drive space by
inserting a drive into the select bay module.
To change the internal hard drive.
1 Shut down your computer completely using the Shut Down
command. See
2 Unplug the computer and remove the battery.
3 Close the display panel and remove any cables you may have
connected.
4 Turn the computer upside down.
5 Remove the screw on the hard drive bay cover.
Removing the hard drive cover screws
6 Lift the hard drive bay cover to expose the hard drive.
7 Grasp the plastic tab on the exposed edge of the hard drive
and pull it to remove the hard drive from the computer.
®
9100 can use various hard drive capacities.
"Turning off the computer" on page 51.