The Control Knob; The Led Indicator; Charging Your Headphones - Marshall Amplification MONITOR II A.N.C. User Manual

THE CONTROL KNOB

Use the control knob on the right ear cap to control audio, start Bluetooth
pairing mode and turn the headphones on or off.
FUNCTION
POWER ON/OFF
PLAY/PAUSE
SKIP FORWARD
SKIP BACK
FAST FORWARD
REWIND
TURN UP THE VOLUME
TURN DOWN THE VOLUME
HANDLE CALLS
007
®
ACTION
Push and hold for 2 seconds
Single-click
Push to the right
Push to the left
Push to the right and hold
Push to the left and hold
Push upwards
Push downwards
Single-click to answer or end call
Double-click to reject an incoming call

THE LED INDICATOR

The LED indicator is located on the left ear cap and shows the headphones
status:
LED STATUS
RED-ORANGE-YELLOW-GREEN
WHITE LIGHT BLINKING EVERY 5TH SECOND
WHITE BLINKING
BLUE BLINKING
OFF

CHARGING YOUR HEADPHONES

When the battery charge is low, an alert will sound.
Plug your headphones into a USB power source via the USB-C cable to charge
the battery. A full battery recharge takes approximately 2 hours, and 15
minutes of charging can get you up to 5 hours of wireless playtime.
HEADPHONES STATUS
Charging (0-100% battery level)
Powered on, connected to a Bluetooth device with
®
audio paused
Searching for previously paired devices
Bluetooth pairing mode
Power off or playing via Bluetooth
008