Stopping A Recorded Event Manually; Covert Mode; Enter Covert Mode - Motorola V300 User Manual

Stopping a recorded event manually

To manually stop a recorded event on the V300:
1. Press the Record Start/Stop button.
2. Press the Record Start/Stop button a second time within 5 seconds to stop an event.
Important! The V300 can be configured in EL to NOT allow manual event stop.
On the camera the display and the front red LED turn off and the top LED turns green.
After a recorded event stops, if your configuration requires event categorization, the event
categorization sequence starts
Tip: Your V300 automatically starts an event whenever any member of the local
recording group reports that it started a group event. To STOP the group event,
press the Record Start/Stop button twice within 5 seconds.

Covert Mode

In Covert Mode the V300 Camera makes no sound and is dark. The display backlight can light up
on demand, depending on your configuration. The camera can still vibrate in Covert Mode
(depending on the configured alert notifications). All V300 functions operate the same way in
Covert Mode as they do in normal mode.
Note: Whether Covert Mode is available is configurable by your administrator.

Enter Covert Mode

Press and hold the Function button for 5 seconds to transition to Covert Mode.
n
The camera vibrates and the display shows COVERT.
The display changes from black on white to white on black during
Covert Mode. All content on the display is the same in Covert Mode as
in normal mode.
You can enter Covert Mode using the SmartControl smart phone app
(page 82).
V300 Body-Worn Camera User Guide
WGD00169 Revision C
(page 27).
Stopping a recorded event manually
25