Front Wheels; Rear Wheels - Kubota WSM BX1880 Workshop Manual

2. GENERAL
(1) Bolt
Front
Rear
2. Then recheck as the following table.
After driving the tractor 200 m (200 yards),
Timing to recheck
after 1 day (8 hours), and thereafter every
the bolts
50 hours
NOTE
• Use the tapered bolts for wheels with beveled or
tapered holes.

2.1 Front wheels

IMPORTANT
• Do not turn the front discs to obtain wider tread.
• Always attach the front wheels as shown in the
following table.
If you do not attach the front wheels as
illustrated in the table, transmission parts may
be damaged.
You cannot adjust width of the front tread.
2-48
Tightening torques
149.2 N⋅m to 179.0 N⋅m
(15.2 kgf⋅m to 18.3 kgf⋅m)
[110 lbf⋅ft to 132 lbf⋅ft]
108.5 N⋅m to 130.2 N⋅m
(11.1 kgf⋅m to 13.3 kgf⋅m)
[80 lbf⋅ft to 96 lbf⋅ft]
BX1880,BX2380,BX2680,RCK60B-23BX,RCK54-23BX,RCK48-18BX,RCK60D-26BX,RCK54D-26BX
TIRES, WHEELS, AND BALLAST
Models BX1880
16×7.50-8 Turf,
Tire
16×7.50-8 Bar
Tread
How to jack up the front axle
WARNING
To avoid serious injury or death:
• Before jacking up the tractor, park it on a firm
and level ground and chock the rear wheels.
• Fix the front axle to keep it from pivoting.
• Select jacks that withstand the machine weight
and set them up at jack point (2).
(1) Front axle case

2.2 Rear wheels

IMPORTANT
• Do not turn the rear discs to obtain wider tread.
• Always attach the rear wheels as shown in the
following table.
If you do not attach the rear wheels as
illustrated in the table, transmission parts may
be damaged.
You cannot adjust width of the rear tread.
2. Wheel tread
BX2380 and BX2680
18×8.50-10 Turf,
18×8.50-10 Bar,
18×8.50-10 Ind.
(A)
930 mm (36.6 in.)
(2) Jack point
KiSC issued 03, 2019 A