Ignition Switch; Propelling Pedals; Brake Pedal - Tennant 830 Operator's Manual

Table of Contents

OPERATION

IGNITION SWITCH

The ignition switch starts and stops the engine

with a key.

Preheat: Turn the key counter-clockwise. The

glow plugs light will come on. When the glow plug

light goes out, usually for 5 to 30 seconds

depending on the weather conditions, the engine

is ready to start.

NOTE: The preheat is not necessary if the

temperature is above 10_ C (50_ F).

Start: Turn the key all the way clockwise.

Release the key as soon as the engine starts.

Stop: Turn the key counter-clockwise.

The propelling pedals control the propelling speed

of the machine. You change the speed of the

machine with the pressure of your foot; the harder

you press the faster the machine travels.

The right pedal is used mainly for sweeping, and

uses the manual throttle.

The left pedal is used mainly for transporting the

machine, and overrides the manual throttle.

The brake pedal stops the machine.

Stop: Take your foot off the propelling pedal and

step on the brake pedal.

830 MM332 (12- -93)

Table of Contents