Removing A Memory Module - Toshiba A100-S2211TD User Manual

16 Turn the computer right side up.
17 Reconnect the cables.
18 Restart the computer.
You can now continue setting up the computer. When the
operating system has loaded, you can verify that the
computer has recognized the additional memory module.
If you are adding an extra memory module after setting up the
computer, verify that the computer has recognized it correctly
as described in

Removing a memory module

If you need to remove a memory module:
1 Complete steps
page 54
module slot cover.
TECHNICAL NOTE: You must have at least one memory
module installed for the computer to work.
"Checking total memory" on page
1–8
to shut down the computer and open the memory
Do not try to remove a memory module with the computer
turned on. You can damage the computer and the memory
module.
Do not remove the memory module while the computer
is in Standby or Hibernation mode. The computer could
hang up the next time you turn it on and data in memory
will be lost. In either of the above cases, the Standby
configuration will not be saved.
Getting Started
Adding memory (optional)
in "Installing a memory module" on
59
61.