Toshiba 1110-S153 User Manual page 46

46
Getting Started
Installing additional memory (optional)
Additional memory comes in 128 MB and 256 MB modules.
There are two memory slots. Your system may have both
slots occupied.
CAUTION: If you use the computer for a long time, the memory
modules will become hot. If this happens, let the modules cool to
room temperature before you replace them.down to locate the
expansion memory slot cover.
You need a standard Phillips no. 1 screwdriver to install a
memory module.
CAUTION: To avoid damaging the computer's screws, use a
standard Phillips no. 1 screwdriver that is in good condition.
If you are adding memory after you have started to use the
computer, begin at step 1, otherwise skip to step 2.
1 Turn off the computer via the Start menu.
See
The operating system turns off the computer.
2 Unplug and remove any cables connected to the
computer.
3 Close the display panel and turn the computer upside
down to locate the expansion memory slot cover.
"Using Turn Off or Shut down" on page 78.