Related Manuals for Vimar 01420.B
Summary of Contents for Vimar 01420.B
- Page 1 Installer manual Installer Mario 1960 Integrated interconnected systems platform. VIEW IoT Smart Systems...
- Page 2 Apple HomeKit is a trademark of apple Inc. App Store is a service mark of Apple Inc. To control this Apple HomeKit-enabled accessory, iOS 9.0 or later is recommended. Controlling this Apple HomeKit-enabled accessory automatically and away from home requires an apple TV with tvOS 10.0 or later or an iPad with iOS 10.0 or later or a HomePod/Siri set up as a home hub.
-
Page 3: Table Of Contents
VIEW IoT Smart Systems Contents 1. Introduction …………………………………………………………………………………………………………………………………………………………………………… 2 2. Types of users ………………………………………………………………………………………………………………………………………………………………………… 3 2.1 Installer ……………………………………………………………………………………………………………………………………………………………………………… 3 2.2 Administrator ………………………………………………………………………………………………………………………………………………………………………… 3 2.3 Basic user …………………………………………………………………………………………………………………………………………………………………………… 3 3. General information about the installer functions ………………………………………………………………………………………………………………………………… 3 3.1 Configuration ………………………………………………………………………………………………………………………………………………………………………… 3 3.2 Maintenance and diagnostics ………………………………………………………………………………………………………………………………………………………... -
Page 4: Introduction
The IP supervisors available, measuring 4.3’’, 7’’ and 10’’ can be used without restriction as supervisors for one or more systems interconnected with the IP network. Thanks to a connection to the Vimar cloud, users can also access a series of advanced remote functions, for both the end user and the installer, each of which specific for the reference system. -
Page 5: Types Of Users
The Vimar Cloud provides software updates towards the gateways and notifies for individual gateways the availability of new updates. Considering the advantages offered by the Vimar Cloud we recommend you use the Internet connection and leave the gateway permanently connected to the system and to... -
Page 6: View Pro App For Configuration
Configuration can be done in two different ways depending on whether a WiFi router is present or not. • If a WiFi router or the Vimar Access point (art. 20195-19195-14195) is connected to the LAN line, configuration can be done from a tablet or PC (fitted with WiFi). •... -
Page 7: Local And Remote Operations
VIEW IoT Smart Systems VIEW Pro App for configuration 4.3 Local and remote operations The following table lists all the operations that the Installer can carry out locally and/or remotely, dividing them up. OPERATION LOCAL REMOTE*** Gateway and touch screen pairing with a system ... -
Page 8: Configuration Procedure And Commissioning
Perform the software and firmware update of the gateways and touch screens (available via OTA for the devices connected to the Cloud or in the Download section of the website: www.vimar.com). Perform the synchronisation* of all gateways and touch screens Perform the configuration of the gateways •... -
Page 9: Registration And Login
4.6 Registration and login To use the VIEW Pro App, and similarly for all the many mobile applications available, you need to register the account paired with installation using the Vimar Cloud which - with a login and password - will then grant access to the available functions. - Page 10 VIEW IoT Smart Systems VIEW Pro App for configuration If you lose or forget your password, use the "Have you forgotten your password?" and the App will send all the instructions to set a new password to the e-mail address pro- vided.
-
Page 11: App Icons And What They Mean
User App = VIEW User App: when the authorisation is revoked, after 5 minutes, the MyVIMAR screen is automatically displayed and the login procedure has to be repeated. Alexa Vocal Assistant = Alexa Skill on VIEW App: when the authorisation is revoked, all Vimar devices can no longer be reached by Amazon. The entire configuration procedure will therefore need to be repeated and the user will lose all settings previously saved. -
Page 12: First Touch Screen Power-On
VIEW IoT Smart Systems VIEW Pro App for configuration 4.8 First touch screen power-on One on, each touch screen will prompt you to set the language, configure the network settings, pair the device with the Installer user and then assign a name to the touch screen. Touch to confirm the settings made and access the next screen;... -
Page 13: Creating The System
After entering the name of the system by selecting confirm with "CREATE"; the new system has now been created. "System UID” is a unequivocal identification for the system which is useful in the event of any support operations by Vimar. - Page 14 VIEW IoT Smart Systems VIEW Pro App for configuration Select the name of the new system (in this case ) and click on ; the VIEW Pro App performs a search of all the gateways and touch screens con- nected, displaying the complete list. In the above example screen, the devices in grey cannot be paired (because they are already paired with the installer whereas those in black are those which can be paired.
- Page 15 VIEW IoT Smart Systems VIEW Pro App for configuration Select to update the list of devices connected in order also to display those, if any, that were wired at a later stage. Select the device to be paired (by clicking on the related wording) and if necessary modify its name. We recommend you pair all the gateways first, followed by the touch screens.
- Page 16 VIEW IoT Smart Systems VIEW Pro App for configuration The button to press depends on the type of device being paired: • For the By-me Plus home automation system gateways 01410-01411 and video door entry system gateways 01415-01416 press the CONF button (see also the respective instruction sheets).
- Page 17 VIEW IoT Smart Systems VIEW Pro App for configuration If synchronisation was unsuccessful for one or more devices, these will be marked with (check the wired connection and if necessary reset it); then select "TRY AGAIN". At the end of synchronisation, the App displays the screen for you to enter the time and date. At the end of the operation, confirm with “SAVE".
- Page 18 VIEW IoT Smart Systems VIEW Pro App for configuration • The "SET DATE AND TIME" and "SYNCHRONISE SYSTEM” buttons are used, as illustrated previously, to set the date and time and to synchronise the devices paired with the system. • When the job is done, using the "SYSTEM DELIVERY” button, the Installer “delivers” the configured and fully operational system to the Administrator user. For further details see chap.
- Page 19 VIEW IoT Smart Systems VIEW Pro App for configuration You can now begin to configure the system devices (By-me Plus, By-alarm burglar alarm system, etc.) which will carry out all the system functions via their respective gate- ways. to select the desired gateway and display a screen similar to the one shown below: If a new software update is available for the gateway, the “UPDATE SOFTWARE”...
-
Page 20: Cloning The System
VIEW IoT Smart Systems VIEW Pro App for configuration - Use "PERFORM BACKUP" for the gateway to transmit the backup data to the Installer’s PC/tablet; the displayed will be then select "CONFIRM". - Use "SAVE BACKUP TO CLOUD" for the PC/tablet to transmit the backup data to the Cloud. - Use "DOWNLOAD BACKUP FROM CLOUD"... -
Page 21: By-Me Home Automation System Gateway Plus Art. 01410-01411
VIEW IoT Smart Systems By-me home automation system gateway Plus art. 01410-01411 5. By-me home automation system gateway Plus art. 01410-01411 The gateways is designed to carry out all operations for configuration, integration, maintenance and supervision (locally or remotely) of the By-me Plus home automation system, via IP/LAN network, Cloud and the VIEW Pro App for smartphone, tablet, PC or touch screen. -
Page 22: By-Me Burglar Alarm System Gateway Art. 01712.1
VIEW IoT Smart Systems By-me burglar alarm system gateway art. 01712.1 6. By-me burglar alarm system gateway art. 01712.1 Gateway 01712.1 is designed to connect the By-alarm control unit to the LAN network to perform all the operations for the control, supervision and maintenance (local or remote) on the By-alarm system via IP/LAN network, Cloud and VIEW Pro App for smartphone, tablet, PC or IP touch screen. - Page 23 VIEW IoT Smart Systems By-me burglar alarm system gateway art. 01712.1 Select the By-alarm gateway; you will be prompted to enter the Customer code. Caution: The Customer code to enter is the customer code of the sixteenth recipient set in the By-alarm control unit via the By-alarm Manager software (see screen below). The customer code of the last telephone number and the reprogramming password are the parameters used for the remote connection with By-alarm Manager (installer con- nection);...
-
Page 24: Importing The Xml File From The By-Alarm Manager Software
VIEW IoT Smart Systems By-me burglar alarm system gateway art. 01712.1 Click on "CONTINUE" (the App will display the "Configuration Complete” confirmation screen) then click on "END" to view the main screen. After the first access to the App the wizard will no longer be active. 6.2 Importing the XML file from the By-alarm Manager software Once the procedure of para. - Page 25 In the event of remote connection, at each access, the App sends the installer a notification with the parameters to enter (they vary each time); for example: In the Internet connection option, on Address enter devicevpn1.vimar.cloud:51700 (51700 is the TCP port).
-
Page 26: Gateway Management
VIEW IoT Smart Systems By-me burglar alarm system gateway art. 01712.1 6.3 Gateway management From the main screen (para. 6.1) click on BY-ALARM GATEWAY; the following screen is displayed: • The GENERAL menu displays all the data relating to the gateway used including the hardware and firmware versions of the device. •... -
Page 27: Burglar Alarm System Management
VIEW IoT Smart Systems By-me burglar alarm system gateway art. 01712.1 6.4 Burglar alarm system management From the main screen, click on BY-ALARM BURGLAR SYSTEM; the following screen is displayed: Click on BY-ALARM BURGLAR ALARM SYSTEM DATA to display the Customer code to the gateway. The Customer code to be modified using the button and confirmed with “SAVE". - Page 28 VIEW IoT Smart Systems By-me burglar alarm system gateway art. 01712.1 • The LOG menu stores all the operations performed on the system via the gateway; this view can also be filtered by level and category by selecting the desired ones with Use "EXPORT SYSTEM LOG"...
-
Page 29: Video Door Entry System Gateway Art. 01415
VIEW IoT Smart Systems Video door entry system gateway art. 01415 7. Video door entry system gateway art. 01415 Gateway 01415 is designed to connect the Due Fili Plus video door entry system to the LAN network to perform all the operations for the control, supervision and maintenance (local or remote) on the systems via IP/LAN network, Cloud and App for smartphone, tablet, PC or touch screen. - Page 30 VIEW IoT Smart Systems Video door entry system gateway art. 01415 • The 2F+ VIDEO DOOR ENTRY SYSTEM GATEWAY INFO menu displays all the data relating to the gateway used including the hardware and firmware versions of the device. • The DATE/TIME menu allows you to display the time and date.
- Page 31 VIEW IoT Smart Systems Video door entry system gateway art. 01415 Alternatively, these parameters can be set directly from SaveProg; once the settings are complete, download the configuration from SaveProg to the gateway 01415. All the data are entered/modified with the button and then confirmed with "SAVE".
-
Page 32: Maintenance
VIEW IoT Smart Systems Video door entry system gateway art. 01415 7.3 Maintenance From the main screen, click on MAINTENANCE; the following screen is displayed: • The SYSTEM LOG menu stores all the operations performed on the system via the gateway; this view can also be filtered by level and category by selecting the desired ones with Use "EXPORT SYSTEM LOG"... -
Page 33: Video Door Entry System Ip Gateway (Router) Art. 01416
VIEW IoT Smart Systems IP video door entry system gateway art. 01416 8. Video door entry system IP gateway (router) art. 01416 Gateway 01416, which is also referred to as the IP video door entry system router, is designed to connect the IP video door entry system to the LAN network to perform all the operations for the control, supervision and maintenance (local or remote) on the systems via IP/LAN network, Cloud and App for smartphone, tablet, PC or touch screen. - Page 34 VIEW IoT Smart Systems IP video door entry system gateway art. 01416 • The IP VIDEO DOOR ENTRY SYSTEM ROUTER INFO menu displays all the data relating to the gateway used including the hardware and firmware versions of the device. •...
-
Page 35: Video Door Entry System Management
VIEW IoT Smart Systems IP video door entry system gateway art. 01416 • Using the UPDATE menu, the gateway checks for the presence of new fw/sw versions and downloads them directly from the Internet; to make the update, select “UPDATE" (the option is only displayed if a new update is available). - Page 36 VIEW IoT Smart Systems IP video door entry system gateway art. 01416 • The IP VIDEO DOOR ENTRY SYSTEM INFO menu allows you to display the identification data of the system (name, building, apartment no., etc.) and of the customer. •...
-
Page 37: Maintenance
VIEW IoT Smart Systems IP video door entry system gateway art. 01416 • The NETWORK PARAMETERS menu allows you to display and set manually the data that identify the device within the network (the IP address of the local network is the one used to connect to the gateway. - Page 38 VIEW IoT Smart Systems IP video door entry system gateway art. 01416 Use "EXPORT SYSTEM LOG" to export the information onto a file that can then be consulted at a later date or kept as an archive. • The DIAGNOSTICS menu allows you to run both the diagnostics of the IP network to which the video door entry system is connected as well as the local IP network where all the gateways and touch screens of the platform are connected.
-
Page 39: System Delivery
VIEW IoT Smart Systems System delivery 9. System delivery Once all the configuration operations are complete and the system is operational, the Installer has to “deliver” it to the Administrator user (usually the owner of the home) so that he or she can use it and customise it to suit individual needs. N.B. - Page 40 VIEW IoT Smart Systems System delivery 4. Select “Manage systems” and then, for "Add system", select The screen listing the systems with which the Administrator may be paired will be displayed (these are marked with the wording WITHOUT ADMINISTRATOR). BROWN HOME JONES’...
-
Page 41: View App And Main Functions
VIEW IoT Smart Systems VIEW App and main functions 10. VIEW App and main functions. This chapter illustrates the principal concepts of the VIEW App, which the Administrator and basic users will utilise to manage the system; it is an extremely simple and straight- forward interface that is displayed on PC, tablet and touch screen. - Page 42 VIEW IoT Smart Systems VIEW App and main functions To close the panel, swipe down or select ICON TYPES. The icons used come in three different shapes depending on what they represent: Circular: representing objects, scenarios or programmes which, when selected, determine an activation or deacti- vation control.
- Page 43 VIEW IoT Smart Systems VIEW App and main functions MANAGE. (Manage) icon is designed to manage and control all the functions configured; you will therefore have a global view of the system and, by touching the related icon, the status of each individual function (how many and which lights are on, how many and which roller shutters are up, the temperature values of the climate control zones, etc.). For instance, if you select (Lights), details of all the objects present are displayed, divided up by environment, with an indication of their status.
- Page 44 VIEW IoT Smart Systems VIEW App and main functions EXPLORE. (Explore) icon is designed to browse the system through its component environments; the view can be in the form of icons or with a view set in a specific environ- ment (photographic) in which the paired elements are inserted.
- Page 45 VIEW IoT Smart Systems VIEW App and main functions • To insert an element in the “Favourites” area: - long press on the related icon (the “Add to favourites” option will be displayed); - drag the selected icon into the “Add to favourites” area. Using the same procedure, and the icons that allow it, you can also choose whether to insert links to every single entrance panel present in the video door entry system in the Home page or in the "Favourites"...
- Page 46 VIEW IoT Smart Systems VIEW App and main functions The possible customisations vary according to the type of user and the rights assigned to the same; the following table shows all the options available, both in terms of supervi- sor device and system customisations. System: Installer Administrator...
-
Page 47: Scenario Creation Example
VIEW IoT Smart Systems VIEW App and main functions 10.3 Scenario creation example • From the "Customise" ( )" screen, touch (Scenarios); the screen with the option to create a new scenario is displayed, along with a list of any created previously. - Page 48 VIEW IoT Smart Systems VIEW App and main functions • Touch ; in this case it is a lamp with an ON/OFF function and RGB control. Touch to switch on or off depending on the status you wish to achieve when the scenario is called up; in this case you want the lamp to be on with specific brightness, intensity and colour characteristics.
- Page 49 VIEW IoT Smart Systems User App and main functions VIEW App and main functions • In this example, no other objects need to be included so touch again to proceed. The screen displaying all the categories of objects is shown again, highlighting the elements that have just been configured. Touch to continue.
- Page 50 VIEW IoT Smart Systems VIEW App and main functions • Touch to continue. You will now be asked whether you wish to pair the scenario with the button of a control in order to call it up manually too; select the desired button and confirm with CAUTION: The button that controls the scenario must be specifically set up by the Installer during the configuration of the By-me Plus system.
- Page 51 VIEW IoT Smart Systems VIEW App and main functions The list of events which can be paired with the scenario will be displayed. Swipe up to view all the available options. For instance, select ALARM; in this case the scenario configured will be activated, not only from the button, but also if an alarm occurs in the SECOND FLOOR zone. ...
- Page 52 VIEW IoT Smart Systems VIEW App and main functions • If you wish to pair a scenario (after creating it) with the logical programme, once the App shows the button pairing screen, select "Not interested" until the "pairing of a pro- gramme with the scenario"...
-
Page 53: Webview
4.3’’ and 10’’. Correct viewing should therefore be tested in advance and assessed for every individual case by the user/installer configur- ing the webview for the first time, relieving Vimar of any liability for any failures that may ensue. - Page 54 VIEW IoT Smart Systems Webview • Confirm using ; the new Webview will be displayed on the Webview management page. to modify the Webview (launching the wizard again) and use to clear the cache. Select to eliminate the Webview; removal will take place upon confirmation (using ) of the following warning: •...
-
Page 55: Webview Use
Example of Webview display with Vimar KNX Web Server art. 01545 During configuration, the URL of the Vimar KNX Web Server was inserted in a Webview called “KNX Web Server”, the icon for which will then be displayed on the Home page;... -
Page 56: Elvox Cctv Integration In Touch Screens
VIEW IoT Smart Systems Elvox CCTV integration in touch screens 12. Elvox CCTV integration in touch screens The By-camera App can be installed in touch screens (art. 01420, 01422 and 01425) to offer the same and even user experience as the version available for smartphone and tablet. -
Page 57: Initial Application Start
VIEW IoT Smart Systems Elvox CCTV integration in touch screens Select "Open" to start the application (or, alternatively, return to the Home screen and select the By-camera App icon): 12.1 Initial application start. When you start the App for the first time (only and solely the first time), the screen viewing will be rotated. The following procedure corrects the orientation of the screens so that they are correctly displayed for every subsequent start. - Page 58 VIEW IoT Smart Systems Elvox CCTV integration in touch screens N.B. To manage the various steps more easily, we recommend where possible to perform the procedure with the touch screen unmounted from the wall support. 1. Select "Skip". 2. Select "Local". 3.
- Page 59 VIEW IoT Smart Systems Elvox CCTV integration in touch screens 5. Close the application with "X" and restart it, selecting the icon on the Home page When the App reopens, the screens will be viewed with the correct orientation (landscape mode). The application is then initialised for the correct horizontal viewing and you can now proceed with all the configuration operations of a CCTV system.
- Page 60 Viale Vicenza 14 36063 Marostica VI - Italy VIEW Pro 04 2004 www.vimar.com...
Need help?
Do you have a question about the 01420.B and is the answer not in the manual?
Questions and answers