Bang & Olufsen Beoplay E8 Faq Manual

Hide thumbs Also See for Beoplay E8:

FAQ'S

1) Question:

I am unable to pair the Beoplay E8 to my device, or it does not auto-connect as it used to do.

What do I do?

Answer:

Some devices need to be paired with the E8 in a specific way. Here are the steps for Bluetooth

pairing with these devices:

1. Enable the Bluetooth pairing mode on E8 - LED indicator flashing blue

2. Find the classic Bluetooth headphone icon (eg,

device and select to pair with it.

3. Do not select BLE symbol (eg.

show the classic Bluetooth icon.

4. After pairing successful, the white LED will be solid ON for 20 seconds on the E8.

5. If the above steps don't work, restart the device and remove all other paired device through

a factory reset. Then pair this device to the E8 only.

To do a factory reset, touch and hold the left and right earphone simultaneously until the

product indicator is flashing red (approximately 10 seconds). E8 will turn off once the reset is

completed

If you select the BLE symbol, remove the E8 from the Bluetooth settings and restart your

device. After powering on the device, perform Bluetooth pairing by selecting the Bluetooth

classic icon.

If problems persist, this can be due to general Bluetooth interference

==============================================================================

for Samsung phone) on your

for Samsung phone). Wait for the device to

Table of Contents

Need help?

Do you have a question about the Beoplay E8 and is the answer not in the manual?

Page 1 FAQ’S 1) Question: I am unable to pair the Beoplay E8 to my device, or it does not auto-connect as it used to do. What do I do? Answer: Some devices need to be paired with the E8 in a specific way. Here are the steps for Bluetooth pairing with these devices: 1.
Page 2 Question I cannot connect my Bluetooth device to my B&O PLAY Bluetooth speaker even though they have already been paired, why? Answer : If you cannot connect your Bluetooth device to an already paired B&O PLAY Bluetooth speaker, you must try following: ...
Page 3 3) Question How do I initiate Bluetooth pairing? Answer Beoplay H4 are ready to pair immediately after unpacking. Turn Bluetooth on and select Beoplay H4. Alternatively, Press Vol+ Vol- simultaneously for 5 seconds to initiate Bluetooth pairing. Turn on Bluetooth on your device, and select Beoplay H4. The indicator turns solid blue when pairing is successful.