Charging Base; Firmware Update - Lenovo T1 User Manual

Routine maintenance
Filter element part
(Replacement of every 1-3 months
is recommended)
1.Remove the old filter element part on the left and right side
along the notch with your fingers.
2.Install the new filter element part and confirm that it is in place.
Note:
According to the water quality of various regions and
frequency of use, it is suggested to replace the filter element

Charging base

(Monthly cleaning is recommended)Wipe
the charging clip with a soft and dry cloth.
Universal wheel
1.Turn over the machine
and pull out the universal
wheel.
2.Clean the hair and dirt on
Water tank
the wheel and axle.
filter element
3.Re-install the wheel and
press it tightly.
Note:

Firmware update

The firmware of the machine can be upgraded using
the mobile phone client. Please connect to the charging
base before upgrading and ensure that the battery is
more than 15%.
When firmware is upgrading, the power button indicator
shines in white and orange alternately.
(Monthly cleaning is recommended)
Wheel
Bracket
Tap water can be used for cleaning. Re-install
it after drying.