Testing
Alarm Operation Test: Push and hold the Test button
on the alarm for a minimum of five seconds. The alarm
will sound, and the red LED blink. The ADT Security
Hub will display an alert for the smoke alarm.
Flashing Red LED
Direct Heat Test: Direct heat toward the alarm using a
hair dryer. Be sure to hold the heat source about 12 inches
from the alarm to avoid damaging the plastic. The alarm
will reset once it cools down.
Press And Hold Until Alarm Sounds
Sm
smo
blo
If th
it a
alar
the
give
YOU
A Y
To c
You
to b
be w
you