How Do I Change The Time, Temperature And Speed Settings; How To Use The Direct Prep - Kenwood CookEasy+ CCL50 Getting Started

How do I change the Time, Temperature and Speed settings?

1. On the front of the appliance, select the setting you wish to change.
2. Turn the control dial to select your desired time, speed and temperature.
3. Press control dial to start the process.
Unfortunately, the settings cannot be changed using the app.
If you need any more help, please contact

How to use the Direct Prep.

The Direct Prep can be used to slice or grate ingredients directly into the bowl or into a side dish.
Follow these steps:
1. Remove the Direct Prep outlet cover.
2. Fit the tower on to the Direct Prep outlet by aligning the
and turn anti-clockwise to secure into place.
3. Holding by the centre grip, push the desired cutting disc on to the drive shaft.
4. Fit the slinger plate on to the drive shaft with the "TOP" lettering facing towards the cutting
disc.
5. Fit the Direct Prep lid to the base by turning in a clockwise direction.
6. Attach the food prep attachment to the tower by aligning the
into place.
7. Once assembled, press the release button and turn the Direct Prep to the desired position.
8. Cut the food to fit the feed tube.
9. Press the Direct Prep Start/Stop button and, at the same time, push down evenly with the
pusher.
If you need any more help, please contact
CCL50 Getting Started with Your Appliance Eng – Iss1
Customer Support for assistance.
Customer Support for assistance.
, then press the release button
and turn clockwise to lock