Related Manuals for Extreme Tools EX3304TC
Summary of Contents for Extreme Tools EX3304TC
- Page 1 ® Painted Steel Tool Cart Model: EX3304TC 33” 4 Drawer Deluxe Tool Cart with Bumpers Extreme Tools, Inc. 740 Frontenac Road Naperville, Illinois 60563 630.369.9303 www.ExtremeTools.net ©2018...
- Page 2 Parts View - Model EX3304TC with Bumpers *14 & 15 are drawer slides located on the interior of the cart...
- Page 3 Parts List - Model EX3304TC ITEM NO. PART NUMBER DESCRIPTION QTY. 3304-00 (V2) BODY WELDMENT DR1-3304 V2 DRAWER 1 DR2-3304 V2 DRAWER 2 3304-29 V2 POST 3304-26 V2 BTM TRAY ASSEMBLY Z-TCBUMPER CORNER BUMPER (TRIMMED) Z-SCM6-12MM M6-1.0X12 SOCKET HEAD SCREW...
- Page 4 Tool Cart Assembly Remove Drawers Remove all drawers before installing the posts. a. Pull out the drawer so that it is almost fully extended. Pull up on the black release lever on one side while pushing down on the release lever on the other side of the drawer.
- Page 5 Bottom Tray Installation Tray is heavy and may require 2 adults to install. a. After installing the four (4) posts, attach the bottom tray. Align the holes of the four corners of the bottom tray with the holes located on the bottom of the posts as shown right.
- Page 6 Drawer Replacement a. BE SURE BRAKES ARE ENGAGED ON ALL CASTERS! b. NOTE: This step requires 2 adults to complete safely. Flip the tool cart into its upright position. c. Unlock the lid. Starting at the bottom, extend the drawer slides. Align the brackets on the sides of the drawers with the slots in the extended slides.
- Page 7 Disengage the brakes to move the tool cart. Engage brakes when tool cart is not being moved. Your tool cart is now ready to use! ® Extreme Tools EX Series 33” 4 Drawer Deluxe Tool Cart with Bumpers...
-
Page 8: Operating Procedure
OPERATING PROCEDURE Drawer Removal Pull drawer out so that it is almost fully extended. Push up on the black lever on one drawer slide and at the same time push down on the lever on the other side. With the levers in these positions, pull the drawer out until it releases from the drawer slides. - Page 9 SAFETY WARNING Do not attempt to lift the cabinet by its side handle using chains, ropes or lifting device. Side handle may fail resulting in personal injury or damage to the product! Use a forklift or similar lifting device with forks placed under the bottom of the tool box to move if tool box cannot be moved by two people.
Need help?
Do you have a question about the EX3304TC and is the answer not in the manual?
Questions and answers