Disassembly; Overall Section - Sony ZV-1 Service Manual

4-2. Disassembly

• Follow the disassembly procedure in the numerical order given.
• When installing, reverse the steps of removal.

4-2-1. Overall Section

[ 1 ] two screws
#248 (M1.4 X 3.5)
(0.12 ± 0.01 N·m)
[ 4 ] three screws
#248 (M1.4 X 3.5)
(0.12 ± 0.01 N·m)
[ 5 ] open the LCD
[ 13 ] Rear Section
Refer to "Notes on Assembling
the Rear Section (1)(2)(3)".
Note 1
[ 12 ] FPC holder (64500)
Refer to "Notes on Assembling the
FPC Holder (64500) ".
[ 11 ] Claw
[ 3 ] screw
#248
(0.12 ± 0.01 N·m)
[ 10 ] open the rear section
MIC lid (64500)
[ 2 ] two screws
#248 (M1.4 X 3.5)
(0.12 ± 0.01 N·m)
[ 6 ] four screws
#248 (M1.4 X 3.5)
(0.12 ± 0.01 N·m)
(M1.4 X 3.5)
While lifting the A portion of the MIC lid
A
(64500), USB lid (64500) and HDMI lid
(64500) slightly with tweezers or the like,
pull MIC lid (64500) the USB lid (64500)
and HDMI lid (64500) in the direction of
arrow to disengage it.
Tweezers
USB lid (64500)
HDMI lid (64500)
Sony CONFIDENTIAL
For Authorized Servicer
[ 7 ] MIC lid (64500)
(Note 1)
[ 8 ] USB lid (64500)
(Note 1)
[ 9 ] HDMI lid (64500)
(Note 1)
24
SYS SET