Related Manuals for Sensr CX1
Summary of Contents for Sensr CX1
- Page 1 CX1 Network Accelerometer & Inclinometer User Guide Version 2.0 June 21, 2016 Copyright © 2016 SENSR Monitoring Technologies LLC. All Rights Reserved. R001-420-V2.0...
-
Page 2: Table Of Contents
System Requirements ................... 6 Installing the USB Device Driver ..............8 Connecting the CX1 to an Ethernet network ................8 Connecting the CX1 to a PC via USB ..................8 Available Software Applications ....................8 Installing CX Recorder ....................9 Installing the CX1 API .................... -
Page 3: Preamble
SOFTWARE WARRANTY. SENSR warrants that for a period of ninety (90) days from the date of shipment from SENSR: (i) the media on which the Software is furnished will be free of defects in materials and workmanship under normal use; and (ii) the Software substantially conforms to its published specifications. - Page 4 The above warranty DOES NOT apply to any beta software, any software made available for testing or demonstration purposes, any temporary software modules or any software for which SENSR does not receive a license fee. All such software products are provided AS IS without any warranty whatsoever.
-
Page 5: Acceptable Use
Acceptable Use The SENSR CX1 is a monitoring instrument only. It is not recommended for any use that requires the instrument to act as a triggering mechanism for critical functions. The CX1 is not to be used for: Monitoring life support or patient diagnoses... -
Page 6: Getting Started
CX1 User Guide Getting started The CX1 may be connected to a PC via USB or an Ethernet network and may be used with several different applications. It is useful to install the USB device driver even if the CX1 will be connected to a network because the USB connection may be used to set the IP address and other network parameters of the CX1. - Page 7 Allow the wizard to install the software automatically. Windows should search the SENSR CD for the appropriate drivers. If the wizard cannot find the correct software, you can install from a specific location. The drivers are located on the SENSR CD in the Drivers\CX Series USB Device Drivers Vx.x.x folder.
-
Page 8: Connecting The Cx1 To An Ethernet Network
Connecting the CX1 to an Ethernet network Start by connecting the Ethernet cable to the CX1. The Ethernet cable may be identified by the 8P8C / RJ-45 connector. The connector on the Ethernet cable is keyed to the CX1 Ethernet connector so that it may only be inserted in the correct orientation. -
Page 9: Installing The Cx1 Api
Store the unit in a dry, indoor environment. CX1 Calibration The CX1 uses a DC response accelerometer and is calibrated using the earth’s gravity. The unit is factory-calibrated using precision surface plates and temperature chambers; users who want to verify the calibration of their unit can connect the unit to a PC and see check outputs of the accelerometer against a level surface. -
Page 10: Product Warranty
Product, or (g) Product used or purchased outside the United States or Canada. During the warranty period, SENSR will repair or replace, at SENSR’s sole option, without charge to Customer, any defective component part of Product. To obtain service under this Limited Warranty, Customer must contact SENSR Customer care at 512.240.5273. - Page 11 CX1 User Guide ARISING FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT COMMITTED BY SENSR, ITS AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR ANY CLAIM BROUGHT AGAINST CUSTOMER BY ANY OTHER PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
Need help?
Do you have a question about the CX1 and is the answer not in the manual?
Questions and answers