Table of Contents
Advertisement
5.3.
Power Cord U / Circuit Breaker
1. Remove the Screw (4x10) which fixes the Motor Com-
plete, and remove the Lead Wire (Yellow).
2. Move the 2 Insulation Tubes from the Circuit Breaker,
remove the faston terminals of Lead Wire A (U) and
Power Cord (U), and remove the Circuit Breaker.
Assembly Instructions
Attach the Lead Wire to the Circuit Breaker, and set
Insulation Tubes firmly.
3. Melt the solder which fixes the Lead Wire (Black) on
Switch Complete B, and remove the Power Cord (U).
18
Hide quick links:
Advertisement
Table of Contents
