Listening to the Radio
You can listen to the chosen band (FM, MW or LW broadcast stations) by using either
the automatic tuning or manual tuning operation.
1
Remote
Press the Tuner(Band)
Control
button.
Unit
•
The selection toggles back
and forth between "FM" "MW"
and "LW" each time the
Tuner(Band) button is
pressed.
1
Press the Function button to
Main
select the desired band (FM,
Unit
MW or LW).
To Listen in Mono/Stereo
Press the MO/ST button. (only FM)
•
The selection toggles back and forth between "STEREO" and "MONO" each time the
MO/ST button is pressed.
•
In a poor reception areas, select Mono mode for a clear, interference-free broadcast.
39
Select a broadcast station.
When the
Auto Station 1
broadcast station is selected.
Hold in the
Auto Station 2
begins, and then stops when a station is tuned in.
Press the
Manual Station
station. The frequency changes incrementally in either
direction each time the corresponding button is pressed.
Select a broadcast station.
Press the Stop (
Auto Station 1
mode. Then press the
station stored in the preset
Press the Stop (
Auto Station 2
mode on the front panel. Then hold in the
button to make the unit begin automaticall searching for
broadcast stations.
Manual Station
Press the Stop (
mode front panel. Press the
to the desired station. The frequency changes
incrementally in either direction each time the
corresponding button is pressed.
Audio
MO/ST
2
button is pressed, a preset
button. Automatic searching
button to tune to the chosen
2
) button to select the PRESET
button to select a
) button to select the MANUAL
) button to select the MANUAL
button to tune