See the Regulatory Notices for all regulatory and safety guidance prior to configuration.
Avant de procéder à la configuration, veuillez consulter les Avis de réglementation, afin de prendre connaissance des recommandations en matière de sécurité et de réglementation.
Get Started
Before you begin, make sure that you have the following:
Network preparation (See
Prepare your environment for Microsoft Teams
Microsoft Teams Room
License (See your Office 365 Admin Center and
Account credentials (See
Configure accounts for Microsoft Teams Rooms)
USB keyboard and mouse
Display HDMI cable(s)
Phillips #1 screwdriver and flathead screwdriver
Unpack the Poly GC8, Lenovo® device, mounting kit, 10 m USB-A to USB-C cable, and Poly Studio from their boxes.
Page 1
USB keyboard and mouse Display HDMI cable(s) Phillips #1 screwdriver and flathead screwdriver Unpack the Poly GC8, Lenovo® device, mounting kit, 10 m USB-A to USB-C cable, and Poly Studio from their boxes. support.polycom.com/mtrsetup For support, go to Poly Support.
Page 2
(Optional) Mount the Lenovo PC using the mounting kit. Refer to the Poly G10 Series, Poly G40 Series, and Poly G85 Series PC Mounting Kit Setup Sheet. Remove the bottom panel from the Poly GC8: loosen the screw with a Phillips #1 screwdriver, turn the GC8 faceup, press the rubber circles on each side, and slide the panel off.
Need help?
Do you have a question about the G40-T and is the answer not in the manual?
Questions and answers