1. Manuals
  2. Brands
  3. Glenair Manuals
  4. Transceiver
  5. 050-352
  6. Instructions manual

Glenair 050-352 Instructions Manual

Pcb mount transceiver
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
P
RINTED
S
MALL
REV
DESCRIPTION
2
Preliminary
3
Updated description on Pin Assignment Table
4
Add ECCN
5
Change PRBS Specification to 2
6
Replace "mm" with "um" on I2C table
7
Edit Bag and Tag Labeling
8
Remove incorrect reference to ATMEL AT240C01A, added optional I2C addressing
9
Corrected datasheet - removed Receiver power monitoring language
BF15U2-2330
THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO
BE DISCLOSED, REPRODUCED IN WHOLE OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED
FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN PERMISSION FROM GLENAIR, INC. THE INFORMATION
HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND INCORPORATION
INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.
050-352
PRODUCT BRIEF
10M
C
B
IRCUIT
OARD
1310
FP T
NM
RANSMITTER
& C
OMPACT WITH
H
ARSH ENVIRONMENTS
7
-1
-200 M
BPS
BPS
(PCB) M
OUNT
, PIN TIA R
R
C
UGGED
ONSTRUCTION FOR
T
RANSCEIVER
ECEIVER
DATE
06/05/2015
01/04/2016
05/26/2016
10/12/2016
11/11/2016
12/12/2016
02/28/2017
6/11/2018
APPROVED
SZ
SZ
RAS
SZ/GC
SZ/GC
RAS/GC
RAS/GC
RAS/SZ

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 050-352 and is the answer not in the manual?

Questions and answers

Summary of Contents for Glenair 050-352

  • Page 1 RAS/SZ BF15U2-2330 THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO BE DISCLOSED, REPRODUCED IN WHOLE OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC.

  • Page 2: Key Features/Benefits

    10 Mbps – 200 Mbps, SMF, 3.3V PCB Mount Fiber Optic Transceiver, 10Mbps-200Mbps, SMF, 3.3V Glenair 050-352, is a ruggedized harsh environment PCB Mount Transceiver with electrical and optical functionality equivalent to SFP transceivers but with mechanical design that is suited to the harsh temperature and vibration environments found in Military, Aerospace, Railway, Oil and Gas, and Industrial applications.
  • Page 3 050-352 Product Brief PCB Mount Transceiver 10 Mbps – 200 Mbps, SMF, 3.3V Ratings and Specifications ABLE BSOLUTE AXIMUM ATINGS Parameter Symbol Units Notes Storage Temperature +100 °C Supply Voltage -0.4 VccT & VccR may not differ by more than 0.5V...
  • Page 4 050-352 Product Brief PCB Mount Transceiver 10 Mbps – 200 Mbps, SMF, 3.3V Ratings and Specifications (cont’d) ABLE OMPLIANCE PECIFICATIONS CHARACTERISTIC Standard Condition Notes Mechanical Shock MIL-STD-810 Para. 516.6, proc. I, 650g 0.9 ms operating Para. 514.6, 40g rms Mechanical Vibration...
  • Page 5 050-352 Product Brief PCB Mount Transceiver 10 Mbps – 200 Mbps, SMF, 3.3V FIGURE 1 - OUTLINE DRAWING CONTINUED (MARKING) LABELING: Each unit will be shipped in an antistatic bag. The label on the antistatic bag shall be at a minimum Arial size 10...

  • Page 6: Functional Description

    050-352 Product Brief PCB Mount Transceiver 10 Mbps – 200 Mbps, SMF, 3.3V UNCTIONAL ESCRIPTION Figure 2 PCB mount Transceiver Block Diagram TRANSMITTER SECTION Transmit Disable (TX_Disable, pin 10) The transmitter section of the transceiver accepts a TTL and CMOS compatible transmit disable control signal input that shuts down the transmitter optical output.
  • Page 7 050-352 Product Brief PCB Mount Transceiver 10 Mbps – 200 Mbps, SMF, 3.3V FUNCTIONAL I/O The PCB Mount Transceiver accepts industry standard differential signals such as LVPECL within the scope of the SFP MSA. To simplify board requirements, transmitter bias resistors and ac coupling capacitors are incorporated, per SFF- 8074i, and hence are not required on the host board.
  • Page 8 050-352 Product Brief PCB Mount Transceiver 10 Mbps – 200 Mbps, SMF, 3.3V PCB M IGURE ECOMMENDED OUNT RANSCEIVER OARD CHEMATIC The PCB Mount Transceiver features EEPROM for Serial ID, which contains the product data stored for retrieval by host equipment.
  • Page 9 050-352 Product Brief PCB Mount Transceiver 10 Mbps – 200 Mbps, SMF, 3.3V of Signal (RX_LOS). The diagnostic information provides the opportunity for Predictive Failure Identification, Compliance Prediction, Fault Isolation and Component Monitoring. Compliance Prediction Compliance prediction is the ability to determine if an optical transceiver is operating within its operating and environmental requirements.
  • Page 10 To protect the transceiver, it’s important to use standard industry ESD handling precautions. These precautions include using grounded wrist straps, work benches, and floor mats in ESD controlled areas. The ESD sensitivity of the Glenair PCB Mount Transceiver is compatible with typical industry production environments.
  • Page 11 PC board. The PCB Mount Transceiver is not designed for aqueous wash, IR reflow, or wave soldering processes and should be mounted on the host board after host PC board has been through these processes. Proper torque values for mounting screws must be observed. Please contact Glenair for hardware mounting process recommendations.
  • Page 12 050-352 Product Brief PCB Mount Transceiver 10 Mbps – 200 Mbps, SMF, 3.3V – A ID: D ABLE IRE INTERFACE IELDS DDRESS Byte Data Byte Data Decimal Notes Decimal Notes Glenair PCB Mount Transceiver Vendor OUI (NOT USED) Serial ID Module Definition Vendor OUI (NOT USED) “GC”...
  • Page 13 050-352 Product Brief PCB Mount Transceiver 10 Mbps – 200 Mbps, SMF, 3.3V Table 10 Two-Wire interface ID: Data Fields – Address A2h is standard – other options available, see part number development Byte # Data Byte # Data Byte #...
  • Page 14 050-352 Product Brief PCB Mount Transceiver 10 Mbps – 200 Mbps, SMF, 3.3V 11 T ABLE RANSCEIVER IGITAL IAGNOSTIC ONITOR HARACTERISTICS HEN APPLICABLE ARAMETER YMBOL NITS OTES Temperature is measured internal to the transceiver and is valid Transceiver Internal Temperature...

  • Page 15: Key Features

    ACCESSORIES Fiber Optic Jumper Cables to support connection to Mil/Aerospace Connectors KEY FEATURES:  Jumper cable between Glenair Transceiver (end A) and Mil/Aero Connector termini (End B)  Offered with either Multimode or Single Mode fibers FIGURE 5 Fiber Optic Jumper Cable Assembly (see separate Glenair sales drawing FA02454 for details)

Table of Contents