Connecting A Vcr - Samsung HCP4252W Connection Manual

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cable
TV system . Skip step 1 if you have not yet
connected to an antenna or a cable system.
1
Connect a coaxial cable between the "ANT IN" (1 or
2) terminal on the TV and the ANTENNA OUT terminal
on the VCR.
A coaxial cable is usually included with a VCR. (If
not, check your local electronics store).
2
Connect a set of audio cables between the "AV IN 1
(L, R)" (or "AV IN 2 (L, R)") jacks on the TV and AUDIO
OUT jacks on the VCR.
If you have a mono VCR, connect L(mono) to VCR
audio out using only one audio cable.
3
Connect a video cable between the "AV IN 1 (VIDEO)"
(or "AV IN 2 (VIDEO)") jack on the TV and the VIDEO
OUT jack on the VCR.
Follow the instructions in "Viewing a VCR or
Camcorder Tape" to view your VCR tape.
• Also, you can connect to "AV 3" on the side panel of TV.
Connecting a Second VCR to Record from the TV
Your TV can send out signals of its picture and sound to be recorded by a second VCR. To do
this, connect your second VCR as follows:
1
Connect a set of audio cables between the "AV OUT
(L, R)" jacks on the TV and the AUDIO IN jacks on the
VCR.
(The VCR input jacks might be either on the front or
rear of the VCR.)
2
Connect a video cable between the "AV OUT (VIDEO)"
jack on the TV and the VIDEO IN jack on the VCR.
Refer to your VCR' s instructions for more information
about how to record using this kind of connection.