TOSHIBA TEC Corporation B-FP Series Manual
  1. Manuals
  2. Brands
  3. TOSHIBA TEC Corporation Manuals
  4. Printer
  5. B-FP Series
  6. Manual

TOSHIBA TEC Corporation B-FP Series Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

TOSHIBA Portable Printer
B-FP Series
Key Operation Specification
1st Edition:
nd
2
Edition:
rd
3
Edition:
Sep 12, 2016
th
4
Edition:
Dec 20, 2016
Mar 14, 2016
Jun 6, 2016

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the B-FP Series and is the answer not in the manual?

Questions and answers

Related Manuals for TOSHIBA TEC Corporation B-FP Series

Summary of Contents for TOSHIBA TEC Corporation B-FP Series

  • Page 1 TOSHIBA Portable Printer B-FP Series Key Operation Specification 1st Edition: Mar 14, 2016 Edition: Jun 6, 2016 Edition: Sep 12, 2016 Edition: Dec 20, 2016...
  • Page 2 Modification History KEY OPERATION SPECIFICATION Modified Pages Date Description – 14MAR2016 Newly published. – 06JUN2016 Completely revised 12SEP2016 1, 2, 6, 7, 8, 10, Explanation and LCD image change for battery icon change and version name change 52, 53 version info change Add battery icon list and corresponding table about parcentage and battery voltage Add explanation about ESSID confirm method in WLAN Parameter print.

  • Page 3: Table Of Contents

    TABLE OF CONTENTS Page SCOPE ······································································································································································································· 1 OUTLINE ··································································································································································································· 1 OPERATION PANEL ··········································································································································································· 1 GENERAL VIEW OF KEY OPERATION ···································································································································· 2 ONLINE MODE ······················································································································································································ 3 GENERAL VIEW OF KEY OPERATION ··························································································································· 3 KEY FUNCTIONS ········································································································································································ 4 LED FUNCTIONS ········································································································································································ 5 LCD FUNCTIONS ·······································································································································································...
  • Page 4 7.4.1 LCD Contrast Setting (LCD Contrast) ·····················································································································63 7.4.2 Code Page Setting (Code Page) ·································································································································63 7.4.3 Zero Font ················································································································································································64 7.4.4 LCD Language Setting (LCD Language) ··················································································································65 7.4.5 Control Code Setting (Control Code) ·······················································································································66 7.4.6 EURO Font Code Setting (EURO Code) ·················································································································67 7.4.7 MaxiCode Specification Setting (Maxicode Spec) ·······························································································67 7.4.8...
  • Page 5 7.8.3 Maintenance Counter Clear (MAINTE Count) ·······································································································98 Interface Setting (I/F Setting) ········································································································································ 101 8. I/F Setting ························································································································································································ 101 7.9.1 USB Serial Number Setting (USB) ······················································································································· 101 7.9.2 Wireless LAN Enable/Disable Setting (WLAN) ·································································································· 101 7.9.2.1 WLAN Mode (MODE) ········································································································································ 102 7.9.2.2 Channel····································································································································································...
  • Page 6 Shifting To Power Save Mode ······································································································································· 116 11.2 When A Wireless LAN Module Is Connected ········································································································· 117 11.3 Precausions··············································································································································································· 117 POWER OFF OPERATION ····················································································································································· 118 12.1 TIME REQUIRED FOR POWER OFF ··························································································································· 118 12.2 PRECAUTIONS ······································································································································································· 118 COPYRIGHT©2016 TOSHIBA TEC CORPORATION ALL RIGHTS RESERVED...

  • Page 7: Scope

    1 SCOPE This specification describes key operations of the B-FP3D series portable printers using their keys and the LCD display. 2 OUTLINE The key operations are performed roughly in two modes: online mode and system mode. In online mode, where the printer is connected to a host device such as a personal computer, the key operations are performed mainly to pause or restart the printer and to display printer status messages and error messages on the LCD.

  • Page 8: General View Of Key Operation

    4 GENERAL VIEW OF KEY OPERATION [Power OFF] Press and hold down the [POWER] key until the message, “Initiallizing…” appears, then 3 sec. or IP address print (B-FP3D-GH40/GS40) more elapses. BD address print (B-FP3D-GH30/GS30) Online mode Press the [POWER] key Data registration, label print, etc.

  • Page 9: Online Mode

    5 ONLINE MODE 5.1 GENERAL VIEW OF KEY OPERATION Online Mode Hold down [FEED]+ Printer state [PAUSE]+ [POWER] Forced (10 sec. or more) power OFF Printer function Hold down [POWER] Power OFF (1 sec. or more) [FEED] (*1) Paper feed, Reprint [PAUSE] [PAUSE]...

  • Page 10: Key Functions

    5.2 KEY FUNCTIONS [POWER] key (1) Turns the printer power on from a power off state and initializes the printer. (2) Performs various parameter settings. [FEED] key: (1) Feeds or ejects 1 label. This key is also used to adjust a label to a proper position. When the label is not properly positioned, feed 1 or 2 blank labels using this key before printing so that the printer can start printing at the proper position.

  • Page 11: Led Functions

    5.3 LED FUNCTIONS [STATUS] LED: Indicates the following statuses: (red/green/orange) Printer power, ON or OFF Communication status of printer Printer error Battery level Strip wait state LED lighting patterns  Power OFF: ..............OFF  Charging in power OFF state........Green/ON ...

  • Page 12: Lcd Functions

    5.4 LCD FUNCTIONS The LCD displays printer status messages. Type Graphics LCD Size 128 dots (W) X 128 dots (H) Display structure 12 digits x 7 lines *1 *1 Maximam digit change because of using proposional font. 5.5 ONLINE MODE LCD DISPLAY 5.5.1 Online Mode LCD Display Example Printer...
  • Page 13 Cover open ←M （ON LINE） essage ← Message Setting ← Icon mode ← Message ← Model name, Firmware version (*1) *About image in User System Mode, Refer to [6 DISPLAY PATTERN AND KEY OPERATION FOR SYS TEM MODE AND USER MODE] *About icon, Refer to [5.5.2 Icon] （*1）The model name description BFP 3 D...

  • Page 14: Icon

    5.5.2 Icon Five kinds of icon are displayed in the top line of the online mode display. These icons are displayed in the online mode/error display. Each mark are updated every 5 seconds. Icon Explanation Wireless LAN icon Displayed and used when the wireless LAN module is mounted. The graph shows the strength of radio wave.
  • Page 15 (*1) Battery icon list 100% Corresponding table about Batery Level and Battery Voltage * Depending on temperature, threthold of Battery Level is changed. Battery Level Ambient temp <= 7.2V <= 7.4V <= 7.8V <= 8.0V <= 8.2V Normal Over 20 battery degree C (*1)

  • Page 16: Online Mode Lcd Display

    5.5.3 ONLINE MODE LCD DISPLAY Idling or normal issuing When [PAUSE] key is pressed, the printer When [PAUSE] key is resumes printing if there is remaining data pressed while printing: Printing is stopped If printer cover is After error recovery (close the print opened while printing: head), press [PAUSE] key...

  • Page 17: Parameter Print

    5.6 Parameter print 5.6.1 Outline of Parameter Print The B-FP with the Bluetooth module or the wireless LAN module performs a parameter print when the [POWER] key is pressed for 3 seconds or more after the printer power is turned on and a “ON LINE” message is displayed on the LCD.
  • Page 18 (2) With Wireless LAN module (B-FP3D-GH/GS40) RF-LAN PARAMS TYPE[FCC] IP [000.000.000.000] LPD [OFF] GW [000.000.000.000] DHCP[ON ] SUB[255.255.000.000] CON [INF] TCP SOCK[ON ][09100] HOST [ ESSID[ MAC:00-0e-10-10-3e-4d WLAN Ver2.1.1 Print contents: IP address (IP) Default Gateway (GW) Subnet Mask (SUB) Socket connection, Port number (TCP SOCKET) Regulatory domain (TYPE) LPR server (LPD)

  • Page 19: Setting Value Display

    5.7 SETTING VALUE DISPLAY Display information about mounted I/F (1) With Bluetooth module（B-FP3D-GH/GS30） Display information: - BD address - Device nickname (2) With Wireless LAN module（B-FP3D-GH/GS40） Display information: - IP address - Allocate IP address (DYNAMIC/STATIC) - MAC address - dBm - Channel - BSSID - Connection mode (AP MODE/ INFRA)

  • Page 20: Threshold Setting

    5.8 THRESHOLD SETTING 5.8.1 Outline of Threshold Setting When a label is printed, the printer detects the gap between the labels using the transmissive sensor, and corrects the print position automatically to obtain a constant print position. However, when a preprinted label is used, some inks may prevent proper positioning correction. In this case, determine the transmissive sensor threshold manually by key operation and store the value in the non-volatile memory.
  • Page 21 <Supplementary Explanations> (1) When the [PAUSE] key is released within 3 seconds while the printer is paused, the [PAUSE] key is invalid. (2) To program the threshold, 1.5 labels or more should be fed. (If the label is not fed by the above amount, the threshold may not be properly programmed.

  • Page 22: Lcd Messages And Led Indications

    5.9 LCD MESSAGES AND LED indications Acceptan LEDIndic ce of ation Recovera Status ble by the Request [PAUSE] LCD Message Printer Status Reset (English) STATUS Comman Yes/No Yes/No ○ ONLINE Online mode ○ The cover was opened in online state. COVER OPEN ●...
  • Page 23 Acceptan LEDIndic ce of ation Recovera Status ble by the Request [PAUSE] LCD Message Printer Status Reset (English) STATUS Comman Yes/No Yes/No SYNTAX ERROR A command error has occurred while △ (Command error)(*3) analyzing the command. Wait for Peel-off label ...
  • Page 24 (*3) When there is command error in received command, up to 61 bytes (up to 31 byte in 1 line) of error command, starting from the command code, are shown on 3 and 4 lines of the LCD. (However, [LF] and [NUL] are not displayed. Also, 43rd bytes and later are not displayed.) When a command error is displayed, “?”...

  • Page 25: Lcd Message

    5.10 LCD Message English German French ON LINE ONLINE EN LIGNE COVER OPEN DECKEL OFFEN CAPOTOUVERT PAUSE PAUSE PAUSE PAPER JAM BOURRAGE PAPIERSTAU PAPIER NO PAPER KEIN PAPIER PAS DE PAPIER HEAD ERROR ERREUR TÊTE KOPF DEFEKT D'IMPRESSION EXCESS HEAD DRUCKKOPF SURCHAUFFE TEMPERATURE...
  • Page 26 PAIRING… PAIRING*** COUPLAGE ABGELEHNT REJETÉ REJECTING… PIN : PIN: PIN: NEIN FAIL FEHLER ECHEC CANCEL ABBRUCH ANNULER ACCEPT AKZEPTIERT ACCEPTER REJECT ABGELEHNT REJETER -20-...

  • Page 27: Error

    Dutch Spanish Italian IN LIJN PREPARADA PRONTA KOP OPEN TAPA ABIERTA TESTATA APERTA PAUZE PAUSA PAUSA PAPIER VAST ATASCO DE CARTA PAPEL INCEPPATA PAPIER OP SIN PAPEL FINE CARTA PRINTKOP ERROR DE ERRORE FOUT CABEZAL TESTINA PRINTKOP EXCESO TEMP. TEMP. TESTA OVERVERHIT DEL CABEZAL TROPPO ALTA...
  • Page 28 VERWORP 31 RECHAZANDO RIFIUTATO PIN: 32 PIN: 33 SI 34 NO 35 OK FOUT 36 FALLO FALLITO CANCEL 37 CANCEL CANCELLATO AANVAARDEN 38 ACEPTAR Accettato AFWIJZEN 39 RECHAZAR Rifiutato -22-...
  • Page 29 Portuguese Polish Chinese PREPARADA ONLINE ONLINE 盖板打开 TAMPA ABERTA POKRYWA OTW PAUSA PAUZA 暂停 ZACIĘCIE PAP. 卡纸 PAPEL ENCRAVADO 缺纸 SEM PAPEL BRAK PAPIERU BŁĄD GŁOWICY 打印头错误 ERRO DE CABECA 打印头温度 EXCES.TEMP. PRZEKR TEMP GŁOWICY NA CABECA 过高 保存中 SALVAR ZAPIS #### &&&&...
  • Page 30 SELECIONE 29 WYBIERZ 选择纸张传感 SENSOR PAPEL CZUJNIK PAP 器 配对中 A EMPARELHAR 30 PAROWANIE 断开中 RECUZAR 31 ODRZUCANIE PIN: 32 PIN : PIN： 33 TAK 是 否 34 NIE 成功 35 OK 36 BŁĄD 失败 FALHA 取消 CANCEL 37 ANULUJ 接受...
  • Page 31 Korean 온라인 커버 열기 멈춤 페이퍼 잼 용지 부족 헤드 에러 헤드 온도 과열 절약 #### &&&& 포맷 에러 플래쉬 메모리 쓰기 에러 플래쉬 메모리 오버 배터리 저전압 주변 온도 에러 배터리 온도 에러 고전압 에러 시스템 에러 대기 (배터리) 대기...
  • Page 32 핀 실패 취소 승인 거부 -26-...

  • Page 33: Charge Error Number List

    5.11 CHARGE ERROR NUMBER LIST Details of Error Cause Battery ID error Battery is not loaded or an unspecified battery is detected. Abnormal battery voltage 8.7V or more Abnormal charge current 0.3A or more Trickle charge timeout After a 90-min. trickle charge, a normal charge did not start.

  • Page 34: System Error No. Detailed List [Reproduction Prohibited]

    5.12 [Reproduction prohibited] System Error No. detailed list Error Detail Cause The setting value failed to be saved in Flash SYSTEM ERROR 03 Setting save error ROM. It is possible to be displayed if program is SYSTEM ERROR 05 Software interruption wrong.
  • Page 35 SYSTEM ERROR 69 The migration process of SPI Serial Mode is Engine error retry-out. The migration process of SPI Serial Mode is SYSTEM ERROR 70 Engine error retry-out. SYSTEM ERROR 71 Overcurrent error Occur overcurrent protection Charging task has been stopped for more than SYSTEM ERROR 80 Watchdog timer error 1 second.

  • Page 36: Display Pattern And Key Operation For System Mode

    6 DISPLAY PATTERN AND KEY OPERATION FOR SYSTEM MODE AND USER MODE 6.1 LIST BOX WITH SCROLLBAR The list box is used for displaying the menus or items to be selected. It is comprised of the following parts. Display example (English) Title Knob Sub title...

  • Page 37: Movement Of The Cursor When Scrolled

    6.2 Movement of the cursor when scrolled The cursor moves in the following way with a depression of the [FEED] or [PAUSE] key. The following table shows the example of depression of the [PAUSE] key. The [FEED] key functions in the same way. Key Operation Press [PAUSE] key The position of the displayed...
  • Page 38 The cursor position when shifting from sub menu or value setting display to its upper menu When shifting from lower menu or value setting display to its upper menu, the cursor is positioned at the previously selected item. -32-...

  • Page 39: Value Setting Display

    6.3 VALUE SETTING DISPLAY The value setting display is used for setting a value by increasing or decreasing it. It is comprised of the following parts. Display example (English) Sub title Title Setting value Setting range The currently programmable item is reverseed. The display of the symbols like “+”...
  • Page 40 [PAUSE] Decreases the setting value by specified step. When the setting value reaches the minimum, it goes to minimum. -34-...

  • Page 41: Information Display

    6.4 INFORMATION DISPLAY The information display is used when no input or setting is performed. It is consists of the following parts. Display example (English) タイトル Title Information Running Scroll Key function (Running) Function Displays the top menu. [FEED] + [PAUSE] [PAUSE] Displays the upper hierarchy.

  • Page 42: System Mode For Service Persons And System Administrators

    7 SYSTEM MODE FOR SERVICE PERSONS AND SYSTEM ADMINISTRATOR S (ALL MENU ITEMS ARE AVAILABLE.) 7.1 OUTLINE OF SYSTEM MODE The printer enters the system mode when the following operation is performed when the printer power is off. ・ Turn on the printer while holding down the [FEED] and [POWER] keys at the same time. The system mode is intended for performing self-test, parameter setting, and other settings.
  • Page 43 Used to set the parameters of the interface such as WLAN, USB, 9.I/F Setting Bluetooth . 10.BASIC Setup Used to set the function of the BASIC program when it is loaded printer. -37-...

  • Page 44: Diagnostic

    Diagnostic Contents of Diagnostic menu MENU ITEM SYSTEM MODE 1.Diagnostic MAINTE CNT Diagnostic Head Check LED Check LCD Check 7.2.1 MAINTE CNT This section describes how to print out the maintenance counter data. The following table shows the menu structure from the top menu of the system mode to MAINTE CNT. MENU ITEM SYSTEM MODE 1.Diagnostic...

  • Page 45: Counter Parameter Print Contents

    COUNTER PARAMETER PRINT CONTENTS 7.2.1.1 (1) B-FP3D-GH/GS30 -39-...
  • Page 46 (2) B-FP3D-GH/GS40 -40-...
  • Page 47 Print condition: Label length 290mm to 305mm Sensor type None Print count (1) Maintenance counter values Item Description Range TOTAL FEED Total label distance covered 0.0 to 320000.0 m (cannot be cleared) in units of 10 cm TOTAL PRINT Total label print distance covered 0.0 to 320000.0 m (cannot be cleared) in units of 10 cm...
  • Page 48 (2) Various parameter values Item Description Value [PC] FEED Feed amount fine adjustment -50.0mm to +50.0mm (*1) TONE Print tone fine adjustment -30step to +30step PEEL Strip position fine adjustment -2.0mm to +3.0mm [KEY] FEED Feed amount fine adjustment -50.0mm to +50.0mm -30step ～...
  • Page 49 LCD language LCD LANGUAGE ENGLISH :English GERMAN :German FRENCH :French DUTCH :Dutch SPANISH :Spanish ITALIAN :Italian PORTUGESE :Portugese SIMP.CHINESE :SIMP.Chinese KOREAN :Korean POLISH :Polish Control code CONTROL CODE AUTO: Automatic selection { | }: { | } method ESC LF NUL: ESC LF NUL method EURO CODE EURO font code Any code...
  • Page 50 LCD LIGHT OFF LCD backlight off timing 1 to 30 sec. NORMAL: Normal mode Battery charge mode Battery charge mode LOW: Battery protection mode EXT CHR AREA 0 to 3200 KB Writable character storage area size (in units of 64 KB) BASIC AREA 0 to 896 KB BASIC file storage area size...
  • Page 51 ≪WLAN SETTING≫ * When the wireless LAN module is installed. Wireless LAN enable/disable OFF: Disable WLAN ON: Enable CHANNEL Conenction channel 1 to 14 DHCP function IP MODE Address set STATIC: disabled DHCP function DYNAMIC: enabled PRTR IP Printer IP address ***.***.***.*** Printer gateway IP address GATE IP...

  • Page 52: Diagnostic

    7.2.2 Diagnostic The procedure for printing the self-diagnosis result is the same as that for the maintenance counter data. 7.3.1 MAINTE CNT. The following table shows the menu structure from top menu of the system mode to Diagnostic. MENU ITEM SYSTEM MODE 1.Diagnostic Diagnostic...

  • Page 53: Auto Self-Diagnosis Printout

    AUTO SELF-DIAGNOSIS PRINTOUT 7.2.2.1 (1) B-FP3D-GH/GS30 （*1） （*2） (Notes)The character “°” used for “°C” may not be printed correctly, depending on the type of the character code selected. （*1） In case of B-FP3D-GS30 is B-FP3D-GS. （*2） In case of B-FP3D-GS30 is 16MB -47-...
  • Page 54 (2) B-FP3D-GH/GS40 （*1） （*2） (Notes)The character “°” used for “°C” may not be printed correctly, depending on the type of the character code selected. （*1） In case of B-FP3D-GH40 is B-FP3D-GH. （*2） In case of B-FP3D-GH40 is 32MB Print condition: Label length 110mm Sensor type...
  • Page 55 (3) Automatic self-test (when there is an invalid setting) When there is an invalid setting, the slant line pattern is printed. Conditions to print slant line pattern:  Battery voltage per cell is less than 2.3 V or 4.25V or more. ...
  • Page 56 (3) Details of self-test print B-FP3D-G S model “H” Plus Standard model “S” Model name 3: 3inch G: 203dpi MAIN 01JAN2016 V1.0:1200 Checksum Version Creation date (Day-Month-Year) Name MAIN: Program area BOOT 01JAN2016 V1.0 :3400 Checksum Version Creation date (Day-Month-Year) Name BOOT: BOOT area SBCS 01JAN2016 V1.0 :5600...
  • Page 57 WLAN 01JAN2016 V1.0:1A00 Checksum Version Creation date (Day-Month-Year) Name WLAN: WLAN program area SDRAM 16MB Capacity of SDRAM Plus model “32MB” Standard model “16MB ” Memory for the system and drawing <Supplemental Explanation>  Normally, the last two digits of the checksum of the program area are 0. ...
  • Page 58 (4) Sensor check SENSOR1 0 0 0 0 0 0 0 0 , 0 0 0 0 0 0 1 0 Blank (Fixed to 0) Cover open sensor 1: The cover is closed. (Printing is not performed when the cover is open.) Blank (Fixed to 0) Blank (Fixed to 0) SENSOR2 [H]+20 ﾟ...
  • Page 59 BATTERY 8.0V [5] Battery Level *1 Battery voltage *1 It changes by ambient temperature (refer to 5.5.2 Icon) (5) Installed interface I/F USB/BT/WLAN USB/BT USB/WLAN Installed interface (6) Loopback test result LOOPBACK BLUETOOTH NG Bluetooth check : Normal : Abnormal : Not installed WIRELESS LAN NG WLAN check...

  • Page 60: Head Check

    7.2.3 Head Check The print head check procedure is the same as that for the maintenance counter data. 8.2.1 MAINTE CNT.. The following table shows the menu structure from the top menu of the system mode to Head Check. MENU ITEM SYSTEM MODE 1.Diagnostic Head Check...

  • Page 61: Led Check

    7.2.4 LED Check The print head check procedure is the same as that for the maintenance counter data. 8.2.1 MAINTE CNT.. The following table shows the menu structure from the top menu of the system mode to LED Check. MENU ITEM SYSTEM MODE 1.Diagnostic LED Check...

  • Page 62: Lcd Check

    7.2.5 LCD Check The print head check procedure is the same as that for the maintenance counter data. 8.2.1 MAINTE CNT.. The following table shows the menu structure from the top menu of the system mode to LED Check. MENU ITEM SYSTEM MODE 1.Diagnostic LCD Check...

  • Page 63: Mode Setting

    7.3 Mode Setting Set the parameters for each printer movement. Contents of Diagnostic menu MENU ITEM SYSTEM MODE 2.Mode Setting CMD Setting Head DIV Head DIV CMD Linerless Print Type Paper Stop POS Backfeed Limit Peel Backfeed Label Width <Supplemental Explanations> When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE] key is pressed.

  • Page 64: Cmd Setting

    7.3.1 CMD Setting This setting selects print mode.  TPCL  TPCL1  LABEL  C Mode  ESC/POS  Z Mode Default value: TPCL *Support mode (o：valid、x：invalid） TPCL, TPCL1, C Mode ESC/POS Z Mode LABEL 7.3.2 Head Division Setting (HEAD DIV) When a printing ratio per line is high, the value of this setting is changed to prevent print tone from becoming lighter.

  • Page 65: Linerless Setting (Linerless)

    7.3.4 Linerless Setting (LINERLESS) This setting is for using a linerless label.  Linerless setting is disabled.  Linerless setting is enabled. Default value: OFF (Linerless setting is disabled.) <Commentary>  When linerless setting is enabled, the printer operates with the AUTO setting although AUTO1 is selected in head division setting.

  • Page 66: Post-Print Stop Position Setting (Stop Position)

    7.3.6 Post-print Stop Position Setting (Stop Position) When back feed restriction is enabled (ON), printing is disabled on a label located between the head and the cutter during next printing after an issue (of one or more labels) since no back feed is performed. To prevent such waste, stop position setting is performed.

  • Page 67: Back Feed Restriction Setting (Backfeed Limit)

    7.3.7 Back Feed Restriction Setting (Backfeed Limit) ・ Back feed restricted (Performs no back feed.) ・ Back feed not restricted (Performs a back feed.) Default value: ON (Back feed restricted) <Commentary>  During label issue with sensor type specified (transmissive/reflective sensor) under the following conditions, this setting determines whether or not to perform a back feed.

  • Page 68: Set Param

    7.4 Set PARAM Contents of Set PARAM menu MENU ITEM SYSTEM MODE 3. Set PARAM LCD Contrast Code Page Zero Font LCD Language Control Code EURO Code Maxicode Spec Auto Off Error Power Off Sleep LCD Off Charge Mode Auto Head CHK Head Error CHK Head Error PRT Feed Check...

  • Page 69: Lcd Contrast Setting (Lcd Contrast)

    7.4.1 LCD Contrast Setting (LCD Contrast) This setting is to adjust the LCD display contrast.  NORMAL  Default value: NORMAL *Support mode (o：valid、x：invalid） TPCL, TPCL1, C Mode ESC/POS Z Mode LABEL 7.4.2 Code Page Setting (Code Page)  PC-850 ...

  • Page 70: Zero Font

    7.4.3 Zero Font This setting determines how zero should be displayed/printed, “Ø” (with slash) or “0” (without slash). ・ 0 without slash ・ 0 with slash Ø: Default value: 0 (Without slash) *Support mode (o：valid、x：invalid） TPCL, TPCL1, C Mode ESC/POS Z Mode LABEL -64-...

  • Page 71: Lcd Language Setting (Lcd Language)

    7.4.4 LCD Language Setting (LCD Language) This setting selects a language to be used for displaying messages on the LCD.  ENGLISH  GERMAN  FRENCH  DUTCH  SPANISH  ITALIAN  PORTUGUESE  SIMP. CHINESE  KOREAN  POLISH Default value: ENGLISH (English) <Supplemental Explanations>...

  • Page 72: Control Code Setting (Control Code)

    7.4.5 Control Code Setting (Control Code) This setting selects a control code to be used in TPCL mode. ・ AUTO Automatic selection between {.|.} method and ESC.LF.NUL method ・ {,|,} / {,|,} {.|.} method ・ ESC,LF,NUL / ESC,LF,NUL ESC.LF.NUL method Default value: AUTO (Automatic selection) (1) AUTO As an interface command control code, [ESC](1BH),[LF](0AH),[NUL](00H) or {(7BH),|(7CH),}(7DH) is...

  • Page 73: Euro Font Code Setting (Euro Code)

    <Supplemental Explanations> The mode specified by the command in accordance with the status of this parameter is different from the actual mode. Also, the data transmission method differs partly. For details, refer to the B-FP Series External Equipment Interface Specification(JEA-03580).

  • Page 74: Auto Power-Off Timing Setting (Auto Off)

    7.4.8 Auto Power-off Timing Setting (Auto Off) This setting selects a time for the printer power to turn off automatically.  The power is not automatically turned off.  It turns off the power following setting time. Max. Min. value Step Display Sign...

  • Page 75: Power Save Mode Timing Setting (Sleep)

    7.4.10 Power Save Mode Timing Setting (Sleep) This setting selects a time for the printer to enter power save mode.  The printer does not enter the power save mode.  It enters power save mode after following setting time Max.

  • Page 76: Battery Charge Mode Setting (Charge Mode)

    7.4.12 Battery Charge Mode Setting (Charge Mode) This setting enables selecting the battery charge mode.  NORMAL Normal mode  Battery protection mode (Low charge voltage) Default value: NORMAL Support mode (o：valid、x：invalid） TPCL, TPCL1, C Mode ESC/POS Z Mode LABEL 7.4.13 Automatic Print Head Check for Broken Dots At Power On Setting (Auto Head CHK)

  • Page 77: Resume Printing After Broken Dots Error Setting (Head Error Prt)

    7.4.15 Resume Printing After Broken Dots Error Setting (Head Error PRT) This setting selects whether or not the printer resumes printing after a broken dots error occurs.  The printer does not resume printing after a broken dots error occurs. ...

  • Page 78: System Mode Password Setting (Password)

    7.4.18 System Mode Password Setting (Password) This setting selects whether or not a new password, which is required to enter system mode for service persons and system administrators, is to be programmed.  Password is not set.  Password is set. Default value: OFF Password: 0000 -72-...

  • Page 79: System Mode And User System Mode Start Screen

    System mode and user system mode start screen 7.4.18.1 when password is enabled When the password is enabled, the password input screen is displayed at the time the system mode or user system mode is started. Password input for system mode Procedure Turn on the printer while holding down the [FEED] and [POWER] keys at the same time.
  • Page 80 Password input for user system mode Procedure Turn on the printer, press the [PAUSE] key to place the printer in pause state. Then, hold down [PAUSE] key for 3 seconds. The password input screen is displayed. Input the password. The printer enters the user system mode. When a wrong password is input Password invalid message is displayed.

  • Page 81: Adjust Set

    7.5 Adjust Set Contents of Adjust Set menu MENU ITEM SYSTEM MODE 4. Adjust Set Feed Adjust X Adjust Tone Adjust REFL Sensor TRANS Sensor Peel Adjust ESC/POS Width <Supplemental Explanations>  When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE] key is pressed.

  • Page 82: Feed Amount Fine Adjustment (Feed Adj.)

    7.5.1 Feed Amount Fine Adjustment (FEED ADJ.) This setting sets a feed amount so that the label is shifted forward or backward from the print start position which has been automatically determined. Max. Min. Step Display Sign Integer Decimal 0-padding Unit of value value...

  • Page 83: X-Coordinate Fine Adjustment (X Adjust)

    7.5.2 X-coordinate Fine Adjustment (X Adjust) This setting sets an amount by which the X-coordinate is shifted to the left or right. Max. Min. value Step Display Sign Integer Decimal 0-padding Unit of value digit place measure +99.9 -99.9 Decimal Exist None Default value: 0.0mm...

  • Page 84: Print Tone Fine Adjustment (Tone Adjust)

    7.5.3 Print Tone Fine Adjustment (Tone Adjust) This setting finely adjusts the print tone against the value automatically set. Max. Min. value Step Display Sign Integer Decimal 0-padding Unit of value digit place measure Decimal Exist None step Default value: 0step <Supplemental Explanations>...

  • Page 85: Transmissive Sensor Manual Threshold Fine Adjustment (Trans Sensor)

    7.5.5 Transmissive Sensor Manual Threshold Fine Adjustment (TRANS Sensor) Max. Min. value Step Display Sign Integer Decimal 0-padding Unit of value digit place measure Decimal None None Default value: 1.4V <Supplemental Explanations> ・ This setting is effective only in the TPCL and TPCL1 modes. ・...

  • Page 86: Strip Position Fine Adjustmentpeel Adjust

    7.5.6 Strip Position Fine AdjustmentPeel Adjust Max. Min. value Step Display Sign Integer Decimal 0-padding Unit of value digit place measure +3.0 -2.0 Decimal Exist None Default value: 0.0mm +0.0 mm Strip stop position (top edge of strip shaft) +3.0 mm Strip stop position (top edge of strip shaft) -2.0 mm Strip stop position (top edge of strip shaft)

  • Page 87: Paper Size For Esc/Pos Setting

    7.5.7 Paper Size for ESC/POS Setting (ESC/POS Width） Max. Min. value Step Display Sign Integer Decimal 0-padding Unit of value digit place measure Decimal None None Default value: 80mm <Supplemental Explanations> This setting is effective only in the ESC/POS mode. There is no command to set paper width in the ESC/POS mode.

  • Page 88: Test Print

    7.6 Test Print Contents of TEST PRINT menu MENU ITEM 3.Test Print Print Condition Slant Line 1dot Slant Line 3dot Characters Barcode Non Printing FACTORY TEST Auto Print(T) Auto Print(R) Process Print <Supplemental Explanations>  When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE] key is pressed.

  • Page 89: Print Condition

    7.6.1 Print Condition This menu enables setting print conditions for test print. Contents of TEST PRINT menu MENU ITEM 3.Test Print Print Condition Issue Count Sensor Print Type Label Length Paper Feed <Supplemental Explanations> ・ Default value at power on is: Issue count Sensor NONE...

  • Page 90: Issue Count Setting (Issue Count)

    Issue Count Setting (Issue Count) 7.6.1.1 This setting sets the number of labels to be printed for test print.  1  3  5  10  50  100  500  1000  5000 Default value: 1 Sensor Setting (Sensor) 7.6.1.2 ...

  • Page 91: Label Length Setting (Label Length)

    Label Length Setting (Label Length) 7.6.1.4 This setting selects a label length for test print. Max. Min. value Step Display Sign Integer Decimal 0-padding Unit of value digit place measure Decimal None None Default value: 63mm <Supplemental Explanations>  The label length, which is larger than the image buffer length, cannot be specified. If specified, the printer prints the data of image buffer length, then stops.

  • Page 92: Slant Line 1Dot

    7.6.3 Slant Line 1dot 1-dot slant line Enlarged view of slant lines 1-dot slant line print (Print ratio: 16.7%) -86-...

  • Page 93: Slant Line 3Dot

    7.6.4 Slant Line 3dot 3-dot slant line Enlarged view of slant lines 3-dot slant line print (Print ratio: 16.7%) -87-...

  • Page 94: Characters

    7.6.5 Characters 7.6.6 Barcode In case of: Head division: AUTO, AUTO1 Head division: AUTO2 7.6.7 Non Printing The printer feeds blank label. -88-...

  • Page 95: Factory Test

    7.6.8 Factory Test 7.6.9 Auto Print(T) The factory test print is performed on the following conditions. The parameter settings and the print density fine adjustment value are ignored.  After each test pattern is printed, the factory test print is performed when the [POWER] key is pressed. ...

  • Page 96: Auto Print

    7.6.10 Auto Print(R) The factory test print is performed on the following conditions. The parameter settings and the print density fine adjustment value are ignored.  After each test pattern is printed, the factory test print is performed when the [POWER] key is pressed. ...

  • Page 97: Sensor Display/Adjustment (Sensor Adj)

    7.7 Sensor Display/Adjustment (Sensor ADJ) Contents of SENSOR ADJUST menu MENU ITEM 6.Sensor ADJ Peel Temperature Reflective Transmissive Paper End Battery VOLT Backlash1 Backlash2 <Supplemental Explanations>  When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE] key is pressed.

  • Page 98: Reflective

    7.7.2 Reflective Head (printer) side Tag paper Reflects Cover side The sensor level of the reflective sensor is registered. Place the tag paper to be used on the reflective sensor so that the sensor can detect a print area. The display of the currently detected value is updated every 200 msec. Hold down the [FEED] key for 3 seconds or more.

  • Page 99: Paper End

    7.7.4 Paper End Paper end level of the transmissive sensor and the reflective sensor is registered. Remove any media from the media sensor. The display of the currently detected value is updated every 200 msec. Hold down the [FEED] key for 3 seconds or more. When the registration of the “paper end level”...

  • Page 100: Ram Clear

    RAM Clear Contents of RAM CLEAR menu MENU ITEM 7. RAM Clear No RAM Clear Parameter MAINTE Count <Supplemental Explanations>  When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE] key is pressed.

  • Page 101: Parameter Clear (Parameter)

    7.8.2 Parameter Clear (Parameter) The parameters settings are cleared. Destination is selectable for parameter clear. The destination code printed on the top right corner of the maintenance counter printout shows which destination was selected for the parameter clear.  QM TYPE RAM clear for Global model ...
  • Page 102 Values after parameter clear Parameter Value +0.0 ㎜ Feed amount fine adjustment (PC) +0.0 ㎜ Print tone fine adjustment (PC) +0.0 ㎜ Strip position fine adjustment (PC) +0.0 ㎜ Feed amount fine adjustment (Key) Print tone fine adjustment (Key) +0step +0.0 ㎜...
  • Page 103 63.0 ㎜ Label pitch 60.0 ㎜ Effective print length 72.0 ㎜ Effective print width Sensor Transmissive sensor PC-save automatic call WLAN Wireless LAN enable/disable CHANNEL IP MODE DYNAMIC Printer IP address 192.168．254.254 Printer gateway IP address 000.000．000.000 Printer subnet mask 255.255．000.000 Printer MAC address Fixed module address...

  • Page 104: Maintenance Counter Clear (Mainte Count)

    7.8.3 Maintenance Counter Clear (MAINTE Count) The maintenance counter, including label distance covered, is cleared.  FEED  PRINT  <Supplemental Explanations> Item of counter clear and default value after clear. Clear item default value Item of counter clear All counte FEED Print after clear...
  • Page 105 Maintenance counter value and various parameter value print Whenever FEED is performed: TOTAL FEED 0.0m [QM] TOTAL PRINT 0.0 m FEED value FEED 0.0 m  FEED1 0.0 m FEED1 FEED2 0.0 m FEED1 value FEED3 0.0 m FEED4 0.0 m ...
  • Page 106 <Supplemental Explanations> 1. LCD image at counter clear Clearing After clear 2. Turn off the printer when “COMPLETED. Turn off the printer” is displayed after the RAM clear is completed. -100-...

  • Page 107: Interface Setting (I/F Setting)

    Interface Setting (I/F Setting) Contents of INTERFACE menu MENU ITEM 8. I/F Setting WLAN Bluetooth *1 It shows only for B-FP3D-GH/GS40 *2 It shows only for B-FP3D-GH/GS30 <Supplemental Explanations>  When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE] key is pressed.

  • Page 108: Wlan Mode (Mode)

    WLAN Mode (MODE) 7.9.2.1 ・ OFF ・ ON ・ CONFIG MODE Default value: ON *About mode setting and authentication , Please refer to Network specification (JEA-03569). -102-...

  • Page 109: Channel

    Channel 7.9.2.2 Max. Min. value Step Display Sign Integer Decimal 0-padding Unit of value digit place measure Decimal None None None Defaul value: 1 <Supplemental Explanations> When a channel, which cannot be used in the country where the printer is going to be shipped, is selected, the channel is changed to the one which can be used in that country.

  • Page 110: Tcp/Ip / Tcp/Ip

    TCP/IP / TCP/IP 7.9.2.3 Contents of WLAN menu MENU ITEM TCP/IP IP Mode Printer IP ADD Gateway ADD Subnet Mask IP Mode 7.9.2.4  STATIC DHCP disable  DYNAMIC DHCP enable Default value: DYNAMIC <Supplemental Explanations> If it sets DYNAMIC, printer can get IPaddress from DHCP server automatically. Printer IP Address Setting (Printer IP ADD) 7.9.2.5 IP address is displayed and set.

  • Page 111: Protocols

    Protocols 7.9.2.8 Contents of Protocols menu MENU ITEM Protocols Socket Port Socket Number LPR Server HTTP Server SNMP Agent 7.9.2.8.1 Socket Communication Setting (Socket Port)  OFF  ON Default value: ON 7.9.2.8.2 Socket Number Socket port number is displayed and set. range: 00000～65535 Default value: 9100 7.9.2.8.3...

  • Page 112: Bluetooth

    7.9.3 Bluetooth Contents of Bluetooth menu ITEM NAME 8. I/F Setting Bluetooth Mode Test Mode Search Setting Security Level Bonding Scan Interval Scan Window Mode 7.9.3.1  AUTO  SPP  OFF Default value: AUTO Test Mode 7.9.3.2  This setting is to identify the device nicknames. ...

  • Page 113: Ssp Auth Type

    SSP AUTH Type 7.9.3.5  JUST WORKS Link level security  NUMERIC KEY CMP Numeric Comparison Default value: JUST WORKS <Supplemental Explanations> If it selects Numeric Comparison, it goes to select menu (Numeric Comparison (NO IN/OUT), Numeric Comparison (DISPLAY ONLY), Numeric Comparison (DISPLAY YES/NO)). Bonding 7.9.3.6 The setting is whether pairing setting is saved or not.

  • Page 114: Basic Setup

    7.10 BASIC Setup Contents of ASIC Setup menu ITEM NAME 9. BASIC Setup BASIC File MAINTE Trace Expand Mode 7.10.1 BASIC Interpreter Setting (BASIC)  This setting selects whether the BASIC interpreter setting is enabled or disabled.  OFF Disabled ...
  • Page 115 program. NOTE:  The BASIC expansion mode ends when the BASIC expansion program is exited.  When the [POWER] key is pressed without the BASIC expansion mode program loaded, the display does not change from “10.BASIC Setup” which indicates the BASIC expansion mode menu. * For details of the BASIC expansion mode, refer to the section, “Startup of System Mode Program”...

  • Page 116: System Mode For Users （Available Menu Items Are Limited.)

    8 SYSTEM MODE FOR USERS （AVAILABLE MENU ITEMS ARE LIMITED.) 8.1 OUTLINE OF SYSTEM MODE FOR USERS The printer enters the system mode for users when the following operation is performed when the printer power is off. ・ Turn on the printer while holding down the [FEED] and [POWER] keys at the same time. The system mode is intended for performing self-test, parameter setting, and other settings.

  • Page 117: Shutdown

    8.2 Shutdown The printer is reset. 8.3 Diagnostic Same as 7.2 Diagnostic of the system mode. 8.4 Mode Setting Same as 7.3 Mode Setting of the system mode. 8.5 Adjust Set Same as 7.5 Adjust Set of the system mode. 8.6 Test Print Same as 7.6 Test Print of the system mode.

  • Page 118: User System Mode

    9 USER SYSTEM MODE OUTLINE OF SYSTEM MODE FOR USERS The printer enters the system mode for users when the following operation is performed when the printer power is off. ・ Turn on the printer while holding down the [FEED] and [POWER] keys at the same time. The system mode is intended for performing self-test, parameter setting, and other settings.

  • Page 119: Reset

    Reset The printer is reset. Diagnostic Same as 7.2 Diagnostic of the system mode. Mode Setting Same as 7.3 Mode Setting of the system mode. Set PARAM Same as 7.4 Set PARAM of the system mode. Adjust Set Same as 7.5 Adjust Set of the system mode. Dump Mode Print the data sent from the host.

  • Page 120: Expand Mode

    16-byte data is printed on one line. Data is printed, starting from the newest data to the older data. Data pointed by the receive buffer write pointer is printed in bold type. NOTE: If an error occurs when printing the receive buffer dump, the printer displays an error message, and stops. The error is cleared by pressing the [PAUSE] key, and the display is returned to the PRINT menu.

  • Page 121: Operation During Battery Charge By Ac Power Supply

    Operation during battery charge by AC power supply This chapter describes the printer operations when the battery is charged through the AC adapter. 10.1 In Printer Power Off State When the AC adapter is being connected with the battery installed: No display (Same as power off) [STATUS] LED (Green) ........

  • Page 122: In Printer Power On State

    When the AC adapter is connected without the battery installed: No display (Same as power off) [STATUS] LED ..OFF [CHARGE] LED ..OFF  If the printer power is turned on under the above condition, a charge error will result. (For details about the charge error, refer to “5.11 Charge Error Number List”...

  • Page 123: When A Wireless Lan Module Is Connected

    time to shift to power save mode, the printer enters power save mode. 11.2 When A Wireless LAN Module Is Connected When a wireless LAN module is connected, “Power Save Mode Setting” inside the module is switched from “No Power Save” to “Auto Power Save” after the printer enters power save mode*. *: Only when the wireless LAN power save setting is enabled.

  • Page 124: Power Off Operation

    POWER OFF OPERATION This section describes printer operations when the power is turned off. 12.1 TIME REQUIRED FOR POWER OFF When the printer is in online mode, holding down the [POWER] key for 1 second or more causes the printer to turn off.

This manual is also suitable for:

B-fp3d-gh40B-fp3d-gs40B-fp3d-gh30B-fp3d-gs30

Table of Contents