Safety Warnings; Personal Safety Warnings; Ce Compliance Warnings - Teknic CLEARPATH MCVC Series User Manual

C P M C / S D U
L E A R A T H
S W
AFETY
P S
ERSONAL AFETY
CE C
OMPLIANCE
T , I .
EKNIC NC
M R
S E R A N U A L
ARNINGS
IMPORTANT: Read this manual before attempting to install, apply
power to, or operate a ClearPath motor. Failure to understand and follow
the safety information presented in this document could result in property
damage, bodily injury or death.
W
ARNINGS
• Do not wear loose clothing or unconfined long hair when using
ClearPath motors. Remove ties, rings, watches and other jewelry
before operating an unguarded motor.
• Do not operate a ClearPath motor if your alertness, cognitive
function, or motor skills are impaired.
• Always handle, and carry a ClearPath motor by the housing (don't
carry it by the shaft or cables).
• Be aware that in certain modes of operation ClearPath is designed
to spin as soon as DC bus power is applied.
• Always understand how to use a mode of operation and its
associated controls before attempting to operate a ClearPath
motor.
• Install and test all emergency stop devices and controls before
using ClearPath.
• Before applying DC power, secure the ClearPath motor to a stable,
solid work surface and install a finger-safe guard or barrier
between the user and the motor shaft.
• Provide appropriate space around the ClearPath motor for
ventilation and cable clearances.
• Do not allow cables or other loose items to drape over, or rest near
the ClearPath motor shaft.
• Never place fingers, hands, or other body parts on or near a
powered ClearPath motor.
• Thoroughly test all ClearPath applications at low speed to ensure
the motor, controls, and safety equipment operate as expected.
W
ARNINGS
•
Do not open device enclosure. There are no user serviceable
parts inside this product.
•
Follow all instructions and use the product only as directed.
•
Safety of any system incorporating this equipment is the
responsibility of the system designers and builders.
•
The machine designers need to recognize and incorporate
required warning symbols, guards and shields for ClearPath
motors that are used in applications that can result in the
. 3 . 0 9
E V
2 3
T . (585) 784-7454
EL