Advertisement
4. operaTion
4.1.
The nozzle can be latched open by pushing the button on the bottom of the handle (fig.5).
fig.4
5. MainTenanCe
6.2.
Check the tightness of all fittings regularly and tighten if necessary.
6.3.
Keep the pump unit clean to highlight any leaks which may develop in service.
6. TroubleshooTing
probleM
low or no flow rate.
leakage from the body pump.
environMenT proTeCTion
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important: no liability is accepted for incorrect use of this product.
warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
sealey group, kempson way, suffolk business park, bury st edmunds, suffolk. ip32 7ar
01284 757500
© Jack Sealey Limited
Latch
Button
fig.5
probleM possible Cause
low level in source tank.
Air entering the pump or suction tube.
Seal damaged.
Parts support is available for this product. To obtain parts, please log on to
www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500
01284 703534
Original Language Version
soluTion
Refill the tank.
Check seals and connections.
Contact your authorised Sealey stockist.
sales@sealey.co.uk
www.sealey.co.uk
dT55BCOMBO1 Issue 1 08/01/19
Advertisement
