Inspection/Maintenance Access Side Cover - Hitachi ZW180 Operator's Manual

INSPECTION/MAINTENANCE ACCESS SIDE COVER

CAUTION:
• Always close the side covers during driving and
operation.
• Do not keep the side covers open on a slope or
when a strong wind is blowing. Failure to do so
may be dangerous because the side cover may un-
expectedly close.
• Take care not to pinch your fingers when opening/
closing the side covers (1) (4).
• Always lock the side covers before inspecting the
vicinity of the engine.
• Before inspecting around the engine, be sure to
secure the side cover with holding rod (6).
• In case the machine is equipped with the fenders (2)
on side covers (1), never ride on the fenders (2).
When opening side cover (1), pull latch (3) upward.
When opening side cover (4), after opening side cover (1),
lower open/close lever (5) located at the rear of the ma-
chine.
NOTE: When required to inspect the machine for a long time
with the side cover kept open, lock the side cover using
the locking rod (6) provided inside the side cover.
Side cover (4) has a holding groove. Engage the hold-
ing rod in the holding groove beforehand.
MAINTENANCE
2
3
6
7-10
1
ZW180
ZW220, 250, 310
4
M4GB-01-141
5 M4GB-01-142
M4GF-07-001
6
M4GB-01-143