Advertisement
Thank you for choosing the HUAWEI CarFi. The HUAWEI
CarFi allows your portable devices to connect to a Wi-Fi
network while you're in a moving vehicle.
Application scenario
Insert the HUAWEI CarFi's power connector end into your car's 12 V cigarette lighter socket.
Your HUAWEI CarFi will then be able to:
Provide Internet access for Wi-Fi devices
Supply power to devices via the USB port (rated output: 5 V, 1 A)
Getting to Know Your HUAWEI CarFi
The following figure shows the HUAWEI CarFi. It is provided only for your reference. The actual
product may vary.
Power button
Network indicator
Blinking red: the HUAWEI CarFi is starting up.
Steady red: the HUAWEI CarFi failed to register with network or only a 2G network is
available.
Steady yellow: weak 3G/LTE signal strength or disabled external charging function.
Steady green: strong 3G/LTE signal strength.
Blinking cyan: the HUAWEI CarFi software is being updated.
Message indicator
Blinking white (first 3 minutes) and then remaining steady white: the message inbox is full.
Steady white: there are unread messages in your inbox, or the message storage is full.
Off: there are no unread messages in your inbox.
USB port
12 V power connector
Micro-SIM card slot
Reset button
Press and hold the reset button for 2 seconds to restore the HUAWEI CarFi to its factory
settings.
Note:
Restoring the default settings of the HUAWEI CarFi will erase all previous settings.
Getting Started
Step 1:
Insert your micro-SIM card.
1
1
2
3
4
5
2
6
7
3
Advertisement
